{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD267D","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD267D","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD267D","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD267D","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD267D CANbus transceiver, half-duplex, 2 Mbps data rate, 4.5V~5.5V supply, 8-SOIC package, -40°C to 125°C operating temperature.","salesMarkdown":"## CAN transceiver for 5V industrial buses This removes the sourcing risk that plagues older CAN transceiver variants and allows the part to be specified into new BOMs without a near-term requalification burden. ## 2 Mbps bus speed and the bus margin trade-off Rated for a 2 Mbps data rate, this transceiver handles the standard CAN 2.0 bit rates up to 1 Mbps with margin, and supports the higher-speed CAN FD data phase where the controller can push 2 Mbps on the bus. The half-duplex architecture is standard for CAN — the driver and receiver share the bus pins, so the protocol handles bus arbitration without collision. ## 8-SOIC footprint and layout considerations Housed in the 8-SOIC (3.90 mm width) package, the SN65HVD267D fits the common SOIC-8 land pattern used by most CAN transceivers in this class.","metaTitle":"SN65HVD267D CAN Transceiver, 2 Mbps, 8-SOIC, Active","metaDescription":"SN65HVD267D CANbus transceiver, half-duplex, 2 Mbps data rate, 4.5V-5.5V supply, -40°C to 125°C, 8-SOIC. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Half","Series":"-","Package":"Tube","Protocol":"CANbus","Data Rate":"2Mbps","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 5.5V","Base Product Number":"65HVD267","Receiver Hysteresis":"125 mV","Operating Temperature":"-40°C~125°C","Supplier Device Package":"8-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.0585","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/7131a7403cb2f3c9c675551334232c65.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD267D/alternatives.json"},"ai":{"faq":[{"question":"Is SN65HVD267D compatible with existing CAN bus designs?","answer":"Yes, it is a standard CAN 2.0 transceiver with a 5V supply, half-duplex interface, and 2 Mbps data rate, so it drops into existing CAN bus nodes that use the common 8-SOIC footprint."},{"question":"Can SN65HVD267D be used as a replacement for SN65HVD230?","answer":"The SN65HVD230 is a 3.3V CAN transceiver, while the SN65HVD267D runs on 5V. They are not pin-compatible replacements — the supply rail difference requires a board-level voltage change."},{"question":"What is the data rate of SN65HVD267D?","answer":"The SN65HVD267D supports a data rate of 2 Mbps, covering standard CAN 2.0 rates up to 1 Mbps and CAN FD data-phase rates at 2 Mbps."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD267D","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD267D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}