{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD265D","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD265D","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD265D","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD265D","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD265D, CANbus Transceiver, Half-Duplex, 1/1 Drivers/Receivers, 2Mbps, 4.5V~5.5V Supply, 8-SOIC, -40°C~125°C.","salesMarkdown":"## CAN transceiver for 5 V industrial buses ## 2 Mbps data rate — bus throughput margin Rated for 2 Mbps, this transceiver supports both classic CAN (up to 1 Mbps) and CAN FD data-phase rates that push beyond 1 Mbps. The 2 Mbps ceiling gives headroom for designs that need to burst diagnostic or firmware-update payloads faster than the arbitration bit rate. If the bus is already running at 500 kbps or 1 Mbps, the part handles it with margin — the limiting factor becomes the controller's clock and the bus length, not the transceiver. ## Supply and temperature — fit for 5 V rails in hot environments The 8-SOIC footprint is a common CAN transceiver package, making it a drop-in replacement for many existing 5 V CAN designs. For dual-sourcing flexibility, the base product number 65HVD265 covers several package and temperature variants.","metaTitle":"TI SN65HVD265D CAN Transceiver, 2 Mbps, 8-SOIC","metaDescription":"Texas Instruments SN65HVD265D half-duplex CAN transceiver, 2 Mbps data rate, 4.5 V to 5.5 V supply, -40°C to 125°C, 8-SOIC.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Half","Series":"-","Package":"Tube","Protocol":"CANbus","Data Rate":"2Mbps","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 5.5V","Base Product Number":"65HVD265","Receiver Hysteresis":"125 mV","Operating Temperature":"-40°C~125°C","Supplier Device Package":"8-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.8168","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/7131a7403cb2f3c9c675551334232c65.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD265D/alternatives.json"},"ai":{"faq":[{"question":"Can SN65HVD265D replace SN65HVD230?","answer":"Both are 5 V half-duplex CAN transceivers in 8-SOIC, but the SN65HVD265D supports a higher data rate of 2 Mbps versus the SN65HVD230's 1 Mbps. The SN65HVD265D also includes 125 mV receiver hysteresis for better noise immunity. Pin-compatible in the same footprint, so it can serve as a drop-in upgrade where the controller supports the higher rate."},{"question":"What is the maximum data rate of SN65HVD265D?","answer":"The SN65HVD265D is rated for a maximum data rate of 2 Mbps."},{"question":"Is SN65HVD265D compatible with 5 V only?","answer":"Yes. It is not designed for 3.3 V CAN networks."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD265D","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD265D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}