{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD253DR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD253DR","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD253DR","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD253DR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD253DR, DeviceNet™ CAN Transceiver, Half-Duplex, 1 Mbps, 4.75V~5.25V, 8-SOIC, -40°C~85°C.","salesMarkdown":"The 1 Mbps data rate covers the standard CAN 2.0 maximum bit rate, so this transceiver handles both DeviceNet and generic CAN networks without a throughput bottleneck. The 160 mV receiver hysteresis provides noise margin on the bus, which matters in electrically noisy industrial environments where ground shifts and coupled interference can corrupt a low-hysteresis receiver. The single driver/receiver pair (1/1) is the typical node count for a CAN transceiver; no surprises there. The 5 V supply rail is standard for CAN PHY layers, so it drops into existing 5 V-powered designs without a regulator change. ## Lifecycle and supply reality No last-time-buy risk here for new designs.","metaTitle":"SN65HVD253DR CAN Transceiver, 1 Mbps, 8-SOIC, Active","metaDescription":"SN65HVD253DR is a 5V CAN transceiver from TI supporting 1 Mbps data rate, half-duplex, DeviceNet series, 8-SOIC package. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Half","Series":"DeviceNet™","Package":"Tape & Reel (TR)","Protocol":"CANbus","Data Rate":"1Mbps","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"4.75V ~ 5.25V","Base Product Number":"65HVD253","Receiver Hysteresis":"160 mV","Operating Temperature":"-40°C~85°C","Supplier Device Package":"8-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.8390","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/ac3b450c82125e96fd5c1194e269b67a.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD253DR/alternatives.json"},"ai":{"faq":[{"question":"Is the SN65HVD253DR a direct replacement for the SN65HVD251?","answer":"The SN65HVD253DR and SN65HVD251 are both 5 V CAN transceivers in 8-SOIC packages from TI, but they are not necessarily pin-compatible drop-in replacements without checking the datasheet. The SN65HVD253DR is specifically part of the DeviceNet series, while the SN65HVD251 is a general-purpose CAN transceiver. Verify the pinout and timing parameters before substituting."},{"question":"Does the SN65HVD253DR support DeviceNet protocol?","answer":"Yes, the SN65HVD253DR is part of the DeviceNet series and supports the DeviceNet protocol, which is built on CAN 2.0. It operates at up to 1 Mbps, matching DeviceNet's maximum data rate."},{"question":"Is the SN65HVD253DR compatible with CAN 2.0?","answer":"Yes, the SN65HVD253DR is a CAN transceiver that supports the CAN 2.0 protocol, as indicated by its CANbus protocol listing. It handles the standard 1 Mbps bit rate and half-duplex communication."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD253DR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD253DR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}