{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD253D","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD253D","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD253D","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD253D","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD253D, DeviceNet™ half-duplex CAN transceiver, 1 Mbps data rate, 4.75V-5.25V supply, 160 mV receiver hysteresis, -40°C to 85°C, 8-SOIC package.","salesMarkdown":"## What this DeviceNet CAN transceiver does on the board It converts the differential bus signals of a CAN protocol controller to the single-ended logic levels the MCU sees, and vice versa. The part handles the 1 Mbps maximum data rate DeviceNet specifies, with a 5V nominal supply rail (4.75V to 5.25V) matching the standard industrial power bus. Receiver hysteresis of 160 mV cleans up a noisy factory-floor CAN bus, reducing false edge detection on long cable runs. ## Industrial temperature range and 5V supply — what they mean for fit The 4.75V to 5.25V supply range is tight enough that a 5V rail with ±5% tolerance keeps it in spec; don't try to run it from a 3.3V bus. If your BOM already carries a 5V supply for sensors or actuators, this part drops right onto that rail without a separate regulator. For a production BOM, this is the straightforward choice — no broker-surplus dependency, no schedule risk from a looming obsolescence date. The DeviceNet series designation tells you it's been characterized and tested for that specific protocol's bus timing and common-mode requirements. ## 8-SOIC package — the standard footprint When replacing a failed part, check the 8-SOIC at the bus connector end.","metaTitle":"SN65HVD253D DeviceNet CAN Transceiver, 1 Mbps, 8-SOIC","metaDescription":"TI SN65HVD253D half-duplex CAN transceiver for DeviceNet. 1 Mbps data rate, 4.75V-5.25V supply, -40°C to 85°C. Active lifecycle.","metaKeywords":null},"attributes":{"series":"DeviceNet™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Half","Series":"DeviceNet™","Package":"Tube","Protocol":"CANbus","Data Rate":"1Mbps","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"4.75V ~ 5.25V","Base Product Number":"65HVD253","Receiver Hysteresis":"160 mV","Operating Temperature":"-40°C~85°C","Supplier Device Package":"8-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.0200","priceTiers":[{"qty":1,"price":"$4.02000","currency":"USD"},{"qty":10,"price":"$3.61000","currency":"USD"},{"qty":25,"price":"$3.41280","currency":"USD"},{"qty":100,"price":"$2.95790","currency":"USD"},{"qty":250,"price":"$2.80620","currency":"USD"},{"qty":500,"price":"$2.51798","currency":"USD"},{"qty":1000,"price":"$2.14650","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/ac3b450c82125e96fd5c1194e269b67a.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD253D/alternatives.json"},"ai":{"faq":[{"question":"Does SN65HVD253D support 1Mbps CAN?","answer":"Yes. The SN65HVD253D is rated for a data rate of 1 Mbps, which is the maximum signaling rate for DeviceNet and standard CAN 2.0B networks. The 160 mV receiver hysteresis helps maintain signal integrity at that speed on long or noisy bus segments."},{"question":"Is SN65HVD253D compatible with DeviceNet?","answer":"Yes. The SN65HVD253D is part of TI's DeviceNet™ series and is specified for the DeviceNet physical layer. It meets the 1 Mbps data rate, 5V supply, and half-duplex bus architecture the protocol requires."},{"question":"What is the closest pin-compatible alternative to SN65HVD253D?","answer":"Within TI's own family, the SN65HVD230 and SN65HVD231 are pin-compatible 8-SOIC CAN transceivers but are specified for CAN 2.0B rather than DeviceNet specifically. The SN65HVD253D is the variant characterized and tested for DeviceNet compliance. For a direct replacement, stay with the SN65HVD253D unless you're willing to re-qualify the bus timing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD253D","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD253D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}