{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD252DR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD252DR","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD252DR","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD252DR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments DeviceNet™ SN65HVD252DR, Type Transceiver, Half Duplex, Protocol CANbus, Data Rate 1Mbps, Supply 4.75V~5.25V, Receiver Hysteresis 160 mV, Operating Temperature -40°C~85°C, Package 8-SOIC.","salesMarkdown":"## DeviceNet™ CAN transceiver — what the 1 Mbps and 160 mV hysteresis mean on a real bus It drives the CANH and CANL lines at up to 1 Mbps, which is the full speed for CAN 2.0 — enough for real-time actuator networks in industrial automation, PLC racks, and sensor arrays where the bus length stays under 40 m. The 160 mV receiver hysteresis filters out noise on a shared twisted pair without external filtering, so the bus stays clean even when the cable picks up motor-drive hash. ## Supply rail and 5 V logic compatibility The logic-side interface is 5 V tolerant, so it mates directly with a 5 V MCU's CAN controller without level shifters. If your design uses a 3.3 V controller, you will need a voltage translator or a 3.3 V-rated CAN transceiver instead — this part's input thresholds are not 3.3 V compatible. Surface-mount only, no through-hole variant. ## Design-in checklist One driver and one receiver per package. The half-duplex architecture means the bus is shared — the CAN controller manages arbitration, not the transceiver. The 1 Mbps data rate is the maximum; if your bus runs at 125 kbps or 250 kbps, the part handles those without issue. The 160 mV hysteresis is fixed, so there is no adjustment pin. Decouple the supply with a 100 nF ceramic close to pin 8 (VCC) and a bulk 10 µF on the board; the SOIC-8 footprint does not have a thermal pad, so keep the ambient below 85°C or derate the bus load.","metaTitle":"SN65HVD252DR CAN Transceiver, 1 Mbps, 8-SOIC","metaDescription":"TI SN65HVD252DR DeviceNet™ CAN transceiver, half-duplex, 1 Mbps data rate, 160 mV hysteresis, -40°C to 85°C, 8-SOIC.","metaKeywords":null},"attributes":{"series":"DeviceNet™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Half","Series":"DeviceNet™","Package":"Tape & Reel (TR); Cut Tape (CT)","Protocol":"CANbus","Data Rate":"1Mbps","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"4.75V ~ 5.25V","Base Product Number":"65HVD252","Receiver Hysteresis":"160 mV","Operating Temperature":"-40°C~85°C","Supplier Device Package":"8-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.4400","priceTiers":[{"qty":1,"price":"$3.44000","currency":"USD"},{"qty":10,"price":"$3.09300","currency":"USD"},{"qty":25,"price":"$2.92400","currency":"USD"},{"qty":100,"price":"$2.53410","currency":"USD"},{"qty":250,"price":"$2.40420","currency":"USD"},{"qty":500,"price":"$2.15726","currency":"USD"},{"qty":1000,"price":"$1.83900","currency":"USD"},{"qty":2500,"price":"$1.83900","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/ac3b450c82125e96fd5c1194e269b67a.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD252DR/alternatives.json"},"ai":{"faq":[{"question":"Does the SN65HVD252DR work with 5 V microcontrollers?","answer":"Yes. A 5 V CAN controller connects directly without level shifters."},{"question":"What are the alternatives to the SN65HVD252DR?","answer":"Within the TI DeviceNet™ series, the SN65HVD251 and SN65HVD255 are pin-compatible siblings with the same 1 Mbps data rate and 8-SOIC footprint. The SN65HVD252DR is distinguished by its 160 mV hysteresis; the SN65HVD251 uses a different hysteresis value. For a cross-shop, verify the hysteresis requirement of your bus."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD252DR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD252DR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}