{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD11P","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD11P","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD11P","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD11P","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD11P, RS-422/RS-485 transceiver, half-duplex, 10 Mbps, 3 V to 3.6 V supply, 35 mV hysteresis, -40 to 85°C, 8-PDIP.","salesMarkdown":"## 10 Mbps half-duplex RS-485 transceiver in a through-hole DIP It integrates one driver and one receiver in an 8-pin PDIP package, making it a drop-in replacement for legacy 5 V designs that have migrated to a 3.3 V bus. The 35 mV of receiver hysteresis gives it clean noise margin on long twisted-pair runs in factory-floor or outdoor telecom installations. ## Through-hole PDIP — still the right call for serviceable boards The 8-DIP (0.300\", 7.62 mm) through-hole package is a deliberate choice for boards that get reworked in the field or assembled in low-volume runs where reflow isn't economical. The 8-PDIP footprint is standard across the SN65HVD11x family, so a board laid out for this part can also take the SN65HVD10 or SN65HVD12 without a layout change — handy when you need to adjust data rate or fail-safe biasing on the same PCB.","metaTitle":"SN65HVD11P RS-485 Transceiver, 10 Mbps, DIP-8","metaDescription":"TI SN65HVD11P half-duplex RS-485/RS-422 transceiver, 10 Mbps data rate, 3.3 V supply, -40 to 85°C, 8-DIP package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Half","Series":"-","Package":"Tube","Protocol":"RS422, RS485","Data Rate":"10Mbps","Mounting Type":"Through Hole","Package / Case":"8-DIP (0.300\\\", 7.62mm)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"65HVD11","Receiver Hysteresis":"35 mV","Operating Temperature":"-40°C~85°C","Supplier Device Package":"8-PDIP","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.5000","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/8184a8761e2cd96372c20ad22682ea16.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD11P/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between SN65HVD11P and SN65HVD10?","answer":"Both are half-duplex RS-485 transceivers in the same 8-PDIP footprint and 3.3 V supply range. The SN65HVD10 is rated for 32 Mbps, while the SN65HVD11P is rated for 10 Mbps. If your bus runs at 10 Mbps or slower, the SN65HVD11P is the cost-optimized choice; if you need the higher data rate, the SN65HVD10 is the pin-compatible upgrade."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD11P","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD11P when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}