{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD10MDREP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD10MDREP","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD10MDREP","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD10MDREP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD10MDREP, RS422/RS485 half-duplex transceiver, 25Mbps data rate, 3V–3.6V supply, -55°C to 125°C, 8-SOIC package, 1/1 driver/receiver.","salesMarkdown":"## RS-485 transceiver with military temperature range It packs one driver and one receiver into an 8-SOIC package, with 35 mV of receiver hysteresis to reject bus noise. ## 25 Mbps and the cable-length tradeoff At 25 Mbps the SN65HVD10MDREP can drive roughly 30–50 meters of twisted-pair before signal degradation forces a lower speed or a repeater. For longer runs — 100+ meters — stepping down to a 250 kbps or 1 Mbps variant (same footprint) trades throughput for reach. The 35 mV hysteresis cleans up reflections on unterminated stubs, which helps in noisy backplane or multi-drop layouts. The base product number is 65HVD10, so any future die revision or package variant will share that root. ## 3.3 V supply — fits common FPGA and MCU rails No level translator needed when the UART or SPI master runs at 3.3 V logic. The 8-SOIC footprint is standard — same land pattern as the SN65HVD10D and SN65HVD11D, so a layout can swap between speed grades without a board respin.","metaTitle":"SN65HVD10MDREP RS485 Transceiver, 25 Mbps, -55 to 125°C","metaDescription":"TI SN65HVD10MDREP half-duplex RS-422/RS-485 transceiver, 25 Mbps data rate, 3V–3.6V supply, -55°C to 125°C. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Half","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Protocol":"RS422, RS485","Data Rate":"25Mbps","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"65HVD10","Receiver Hysteresis":"35 mV","Operating Temperature":"-55°C~125°C","Supplier Device Package":"8-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.8000","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/260dfe42630d64b7049013c6f589b85d.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD10MDREP/alternatives.json"},"ai":{"faq":[{"question":"Is SN65HVD10MDREP equivalent to SN65HVD10D?","answer":"The SN65HVD10D is the commercial-temperature (0°C to 70°C) sibling of the SN65HVD10MDREP. Both share the same 8-SOIC footprint, 25 Mbps data rate, and 3.3 V supply. If your design only sees indoor temperatures, the SN65HVD10D is a lower-cost alternative; for avionics or downhole use, stick with the MDREP."},{"question":"Can SN65HVD10MDREP be used in RS485 networks?","answer":"Yes — the SN65HVD10MDREP is specified for both RS-422 and RS-485 protocols. The half-duplex RS-485 bus topology is its primary use case, supporting up to 25 Mbps on a single twisted pair with the driver and receiver sharing the same differential lines."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD10MDREP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD10MDREP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}