{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD10DR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD10DR","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD10DR","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD10DR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD10DR, RS-485/RS-422 transceiver, half-duplex, 32 Mbps data rate, 3V to 3.6V supply, 8-SOIC package, -40°C to 85°C operating temperature.","salesMarkdown":"## 32 Mbps half-duplex RS-485 transceiver — 3.3V-only, industrial temp ## 3.3V-only supply — 5V bus tolerance is not on the table It cannot tolerate 5V on the VCC pin. If the design runs a 5V logic rail, you need a level translator or a different transceiver. The bus pins are RS-485 compliant and handle common-mode voltages up to -7V to +12V per the RS-485 standard, but the device itself is not 5V-tolerant on the supply side. For 5V systems, look at the SN65HVD10 (non-DR suffix) or the SN65HVD11 family.","metaTitle":"TI SN65HVD10DR RS-485/RS-422 Transceiver, 32 Mbps, 8-SOIC","metaDescription":"Texas Instruments SN65HVD10DR half-duplex RS-485/RS-422 transceiver, 32 Mbps data rate, 3V to 3.6V supply, -40°C to 85°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Half","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Protocol":"RS422, RS485","Data Rate":"32Mbps","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"65HVD10","Receiver Hysteresis":"35 mV","Operating Temperature":"-40°C~85°C","Supplier Device Package":"8-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.0600","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/8184a8761e2cd96372c20ad22682ea16.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD10DR/alternatives.json"},"ai":{"faq":[{"question":"Is SN65HVD10DR a half-duplex or full-duplex transceiver?","answer":"It is a half-duplex transceiver with one driver and one receiver, sharing the same bus pins. For full-duplex operation, you would need two of these or a dedicated full-duplex part like the SN65HVD12."},{"question":"Can SN65HVD10DR replace SN65HVD10D directly?","answer":"Yes, the SN65HVD10DR is functionally identical to the SN65HVD10D. The only difference is the packaging: the DR suffix denotes Tape & Reel (suitable for automated pick-and-place), while the D suffix is typically supplied in tubes. Both share the same 8-SOIC footprint, pinout, and electrical specifications."},{"question":"What is the closest pin-compatible alternative to SN65HVD10DR in this component family?","answer":"Within the same family, the SN65HVD10D is pin-compatible and electrically identical, differing only in the shipping medium (tube vs. Tape & Reel). For a 5V-tolerant alternative, the SN65HVD11 series offers similar pinout but with a wider supply range."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD10DR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD10DR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}