{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S25FL512SDSBHI213","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"S25FL512SDSBHI213","canonicalUrl":"https://icboms.com/infineon/S25FL512SDSBHI213","factsUrl":"https://icboms.com/api/mcp/products/S25FL512SDSBHI213","rawCanonicalId":null},"summary":{"shortDescription":"Infineon FL-S Series, 512Mbit, FLASH - NOR, SPI - Quad I/O, 80 MHz, 2.7V ~ 3.6V, -40°C ~ 85°C, 24-TBGA, Surface Mount, Tape & Reel.","salesMarkdown":"The Infineon S25FL512SDSBHI213 is a 512 Mbit FLASH - NOR memory from the FL-S series, organized as 64M x 8 and accessed through an SPI - Quad I/O interface at 80 MHz. This density and interface combination suits code shadowing from a slower boot source into RAM, execute-in-place for firmware with moderate latency tolerance, and over-the-air update staging in embedded systems that need non-volatile storage with fast random read. The 2.7 V to 3.6 V supply range and industrial temperature grade from -40°C to 85°C cover outdoor telecom, factory automation, and networking equipment where the board sits in a ventilated enclosure but not a climate-controlled room. ## 80 MHz clock and Quad I/O — what the read throughput means for the bus At 80 MHz with Quad I/O, the effective read throughput reaches roughly 40 MB/s in continuous-read mode, which is enough to feed an ARM Cortex-M or low-end Cortex-A core executing code directly from the Flash without a separate RAM shadow for many control-loop applications. The Quad I/O interface reduces the pin count to six signals (four data, one clock, one chip select) versus a parallel NOR interface, freeing GPIO on the host MCU. The 80 MHz clock is the rated maximum; actual throughput depends on the host SPI controller's ability to sustain back-to-back transactions without turnaround dead cycles.","metaTitle":"Infineon S25FL512SDSBHI213 512Mbit NOR Flash, 80MHz Quad SPI","metaDescription":"S25FL512SDSBHI213 512Mbit FLASH - NOR, SPI - Quad I/O, 80 MHz clock, 2.7V-3.6V, -40°C to 85°C, 24-BGA. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Mfr":"Infineon Technologies","Series":"FL-S","Package":"Tape & Reel (TR)","Technology":"FLASH - NOR","Memory Size":"512Mbit","Memory Type":"Non-Volatile","Memory Format":"FLASH","Mounting Type":"Surface Mount","Package / Case":"24-TBGA","Product Status":"Active","Clock Frequency":"80 MHz","lifecycle_stage":"eol_hot","Memory Interface":"SPI - Quad I/O","Voltage - Supply":"2.7V ~ 3.6V","Base Product Number":"S25FL512","Memory Organization":"64M x 8","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"24-BGA (8x6)","Write Cycle Time - Word, Page":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6.6893","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/5ca2c9e997000814ce499eab8be33170.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Does S25FL512SDSBHI213 support Quad SPI interface?","answer":"Yes, the S25FL512SDSBHI213 uses an SPI - Quad I/O memory interface, supporting four data lines for higher read throughput compared to standard SPI."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/S25FL512SDSBHI213","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/S25FL512SDSBHI213 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}