{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S25FL512SDPMFV011","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"S25FL512SDPMFV011","canonicalUrl":"https://icboms.com/infineon/S25FL512SDPMFV011","factsUrl":"https://icboms.com/api/mcp/products/S25FL512SDPMFV011","rawCanonicalId":null},"summary":{"shortDescription":"Infineon FL-S Series S25FL512SDPMFV011, 512 Mbit SPI - Quad I/O NOR Flash, 66 MHz clock, 2.7V–3.6V supply, -40°C to 105°C, 16-SOIC (7.50mm width) surface-mount package.","salesMarkdown":"It uses the SPI Quad I/O interface, which allows four data lines for read operations at a 66 MHz clock, delivering faster throughput than standard SPI while keeping the pin count low — a practical choice for embedded systems that need a large code or data store without a parallel bus footprint. ## 66 MHz clock and Quad I/O — read throughput in practice At 66 MHz with Quad I/O, the effective read throughput is about 33 MB/s in fast-read mode. That is enough for direct code execution (XIP) from NOR Flash in many MCU and SoC designs, as long as the host controller supports Quad I/O. The 512 Mbit density (64 MB) holds a full firmware image plus a file system or configuration tables, with room for OTA update staging. For designs that need higher throughput, a DDR Quad I/O part would be the next step, but this part keeps the pin count at six signals (plus chip select) — a fair trade-off for a 16-SOIC layout. The FL-S series is a mature, broadly adopted family, so PCN risk is low relative to a niche or recently introduced part. ## Package and mounting — 16-SOIC wide-body It uses a gull-wing lead form, which is straightforward to inspect and rework. The package is rated for standard reflow profiles (MSL 3 typical for this class — verify the specific moisture sensitivity level from the lot date code). For layout, keep the SPI signal traces short and matched for the 66 MHz clock rate, and place a 100 nF decoupling capacitor within 2 mm of each VDD pin.","metaTitle":"S25FL512SDPMFV011 512 Mbit SPI NOR Flash, 66 MHz","metaDescription":"Infineon S25FL512SDPMFV011 512 Mbit SPI NOR Flash, 66 MHz Quad I/O, 2.7V–3.6V, -40°C to 105°C, 16-SOIC.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Mfr":"Infineon Technologies","Series":"FL-S","Package":"Tube","Technology":"FLASH - NOR","Memory Size":"512Mbit","Memory Type":"Non-Volatile","Memory Format":"FLASH","Mounting Type":"Surface Mount","Package / Case":"16-SOIC (0.295\\\", 7.50mm Width)","Product Status":"Active","Clock Frequency":"66 MHz","lifecycle_stage":"eol_hot","Memory Interface":"SPI - Quad I/O","Voltage - Supply":"2.7V ~ 3.6V","Base Product Number":"S25FL512","Memory Organization":"64M x 8","Operating Temperature":"-40°C~105°C(TA)","Supplier Device Package":"16-SOIC","Write Cycle Time - Word, Page":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9.4325","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/5ca2c9e997000814ce499eab8be33170.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What are the alternatives to S25FL512SDPMFV011?","answer":"Within the same FL-S series, density variants (256 Mbit, 1 Gbit) share the same 16-SOIC footprint and Quad I/O interface, so a BOM can scale up or down without a board spin. Pin-compatible parts from other vendors exist but require verifying the command set and status register layout — the FL-S series uses a specific command set that may differ from generic SPI NOR Flash."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/S25FL512SDPMFV011","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/S25FL512SDPMFV011 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}