{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S25FL512SAGMFVR11","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"S25FL512SAGMFVR11","canonicalUrl":"https://icboms.com/infineon/S25FL512SAGMFVR11","factsUrl":"https://icboms.com/api/mcp/products/S25FL512SAGMFVR11","rawCanonicalId":null},"summary":{"shortDescription":"Infineon S25FL512SAGMFVR11, FL-S series, 512Mbit SPI NOR Flash, 133 MHz Quad I/O, 2.7–3.6 V, -40 to 105 °C, 16-SOIC.","salesMarkdown":"## 133 MHz Quad I/O — what it buys the firmware engineer Quad-SPI at 133 MHz pushes the raw read throughput past 66 MB/s in quad-output mode. For a Cortex-M or RISC-V booting from this NOR, that means the firmware shadow from the 512 Mbit array into the MCU's internal SRAM completes in well under a second — no need for a dedicated parallel Flash bus. The Quad I/O interface uses the same four data pins for address and data, so the layout stays at six signals (CS, SCK, IO0–IO3) plus supply and ground. The 16-SOIC (7.50 mm width) footprint is a common NOR Flash land pattern — double-check the pin 1 orientation against your board, but the 300-mil body is standard across the FL-S family. The FL-S series has broad second-source overlap with other 512 Mbit Quad-SPI NOR parts, but Infineon's own die revision and command set should be verified against your host controller's SPI timing.","metaTitle":"Infineon S25FL512SAGMFVR11 512Mbit NOR Flash","metaDescription":"Infineon S25FL512SAGMFVR11 512Mbit SPI NOR Flash, 133 MHz Quad I/O, -40 to 105°C, 16-SOIC. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Mfr":"Infineon Technologies","Series":"FL-S","Package":"Tube","Technology":"FLASH - NOR","Memory Size":"512Mbit","Memory Type":"Non-Volatile","Memory Format":"FLASH","Mounting Type":"Surface Mount","Package / Case":"16-SOIC (0.295\\\", 7.50mm Width)","Product Status":"Active","Clock Frequency":"133 MHz","lifecycle_stage":"eol_hot","Memory Interface":"SPI - Quad I/O","Voltage - Supply":"2.7V ~ 3.6V","Base Product Number":"S25FL512","Memory Organization":"64M x 8","Operating Temperature":"-40°C ~ 105°C (TA)","Supplier Device Package":"16-SOIC","Write Cycle Time - Word, Page":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10.1000","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/5ca2c9e997000814ce499eab8be33170.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is S25FL512SAGMFVR11 compatible with Quad SPI?","answer":"Yes, the memory interface is SPI with Quad I/O support, so it can operate in single, dual, or quad read modes. The 133 MHz clock applies to all modes."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/S25FL512SAGMFVR11","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/S25FL512SAGMFVR11 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}