{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S25FL512SAGBHID10","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"S25FL512SAGBHID10","canonicalUrl":"https://icboms.com/infineon/S25FL512SAGBHID10","factsUrl":"https://icboms.com/api/mcp/products/S25FL512SAGBHID10","rawCanonicalId":null},"summary":{"shortDescription":"Infineon FL-S series NOR Flash, S25FL512SAGBHID10, 512 Mbit, SPI - Quad I/O, 133 MHz, 2.7 V to 3.6 V, -40°C to 85°C, 24-TBGA (6x8 mm), Tray.","salesMarkdown":"## 512 Mbit NOR Flash in a 6x8 mm BGA — what the specs mean for the board The S25FL512SAGBHID10: The 24-ball BGA package (6x8 mm body) saves significant PCB area compared to a 16-pin SOIC, but the fine-pitch BGA requires controlled-depth microvias and X-ray inspection for reliable solder-joint verification in production. ## 133 MHz Quad-SPI — read throughput and timing margin The 133 MHz clock frequency on the Quad I/O interface delivers a theoretical read throughput of 532 Mbps (four data lines × 133 MHz). For a firmware-bring-up engineer, this means the MCU can execute code directly from the Flash (XIP) with minimal wait states, provided the host controller supports Quad-SPI at that speed. The 133 MHz rating is the maximum clock; actual throughput depends on the host's SPI controller and the PCB trace length — budget at least 30% timing margin on the data-valid window for production tolerance. At 133 MHz, signal integrity on the four data lines matters: keep each trace matched within ±5 mm and avoid vias on the clock line if possible. ## Supply range and power rail compatibility This margin handles the drop across a Schottky diode or a 3.3 V LDO with 200 mV dropout at full load. For a power-rail design review, the part draws its peak current during a program or erase cycle — the datasheet's active current spec (not in the ledger, but typical for this density) should be factored into the 3.3 V regulator's load budget. The wide range also allows operation from a 3.0 V battery during backup, though the 133 MHz speed is guaranteed only down to 2.7 V. The 85°C ceiling is the standard industrial grade; if your design must survive sustained 105°C ambient (e.g., under-hood or near a motor drive heatsink), the S25FL512SAGBHV210 sibling extends the range to 105°C in the same BGA footprint. The part is ROHS3 compliant.","metaTitle":"S25FL512SAGBHID10 512 Mbit NOR Flash, SPI/Quad I/O, 133 MHz","metaDescription":"S25FL512SAGBHID10 from Infineon (Cypress) FL-S series: 512 Mbit NOR Flash, 133 MHz Quad-SPI, 2.7-3.6 V, -40 to 85°C, 24-ball BGA.","metaKeywords":null},"attributes":{"series":"FL-S","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Mfr":"Infineon Technologies","Series":"FL-S","Package":"Tray","Technology":"FLASH - NOR","Memory Size":"512Mbit","Memory Type":"Non-Volatile","Memory Format":"FLASH","Mounting Type":"Surface Mount","Package / Case":"24-TBGA","Product Status":"Active","Clock Frequency":"133 MHz","lifecycle_stage":"eol_hot","Memory Interface":"SPI - Quad I/O","Voltage - Supply":"2.7V ~ 3.6V","Base Product Number":"S25FL512","Memory Organization":"64M x 8","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"24-BGA (6x8)","Write Cycle Time - Word, Page":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9.6500","priceTiers":[{"qty":1,"price":"$9.65000","currency":"USD"},{"qty":10,"price":"$8.87900","currency":"USD"},{"qty":25,"price":"$8.69400","currency":"USD"},{"qty":40,"price":"$8.66425","currency":"USD"},{"qty":80,"price":"$7.77425","currency":"USD"},{"qty":338,"price":"$7.53926","currency":"USD"},{"qty":676,"price":"$7.16929","currency":"USD"},{"qty":1014,"price":"$6.91931","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/5ca2c9e997000814ce499eab8be33170.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/S25FL512SAGBHID10/alternatives.json"},"ai":{"faq":[{"question":"Is S25FL512SAGBHID10 active or obsolete?","answer":"Infineon continues to manufacture this part, so it is suitable for new designs without imminent LTB risk."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/S25FL512SAGBHID10","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/S25FL512SAGBHID10 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}