{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S25FL256SDSBHV200","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"S25FL256SDSBHV200","canonicalUrl":"https://icboms.com/infineon/S25FL256SDSBHV200","factsUrl":"https://icboms.com/api/mcp/products/S25FL256SDSBHV200","rawCanonicalId":null},"summary":{"shortDescription":"Cypress FL-S series S25FL256SDSBHV200, 256 Mbit NOR Flash, SPI Quad I/O interface, 80 MHz clock frequency, 2.7V-3.6V supply, -40°C to 105°C operating temperature, 24-BGA (8x6 mm) package.","salesMarkdown":"## 80 MHz Quad-SPI — bus margin and layout considerations At 80 MHz the SPI clock period is 12.5 ns. The Quad-I/O mode reads four bits per clock, so the effective throughput is 320 Mbps. That is fast enough to support XIP (eXecute-In-Place) from the Flash for many MCUs, but the signal-integrity budget is tight. The supply decoupling should use a 100 nF ceramic per VDD pin placed within 2 mm of the ball. ## Package and temperature — design-in checklist The 24-BGA (8x6 mm) package is a surface-mount BGA with a 0.8 mm ball pitch. It requires a solder-paste stencil with 0.4 mm aperture diameter and a reflow profile that peaks at 245°C to 260°C (lead-free). The supply voltage tolerance of 2.7V to 3.6V means the part runs from a 3.3V rail with 300 mV of headroom on the low side — fine for a regulated supply, but check the rail during brownout or cold-crank if the system dips below 2.7V.","metaTitle":"S25FL256SDSBHV200 256 Mbit NOR Flash, 80 MHz Quad-SPI","metaDescription":"Cypress S25FL256SDSBHV200 256 Mbit NOR Flash, SPI Quad I/O interface, 80 MHz clock, 2.7V-3.6V supply, -40°C to 105°C, 24-BGA.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Mfr":"Infineon Technologies","Series":"FL-S","Package":"Tray","Technology":"FLASH - NOR","Memory Size":"256Mbit","Memory Type":"Non-Volatile","Memory Format":"FLASH","Mounting Type":"Surface Mount","Package / Case":"24-TBGA","Product Status":"Active","Clock Frequency":"80 MHz","lifecycle_stage":"eol_hot","Memory Interface":"SPI - Quad I/O","Voltage - Supply":"2.7V ~ 3.6V","Base Product Number":"S25FL256","Memory Organization":"32M x 8","Operating Temperature":"-40°C ~ 105°C (TA)","Supplier Device Package":"24-BGA (8x6)","Write Cycle Time - Word, Page":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.8649","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"Is S25FL256SDSBHV200 compatible with SPI interface?","answer":"Yes, the memory interface is SPI Quad I/O. It supports standard SPI, Dual SPI, and Quad SPI modes at up to 80 MHz clock frequency. The Quad I/O mode reads four bits per clock cycle for higher throughput."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/S25FL256SDSBHV200","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/S25FL256SDSBHV200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}