{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S25FL129P0XBHIZ13","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"S25FL129P0XBHIZ13","canonicalUrl":"https://icboms.com/infineon/S25FL129P0XBHIZ13","factsUrl":"https://icboms.com/api/mcp/products/S25FL129P0XBHIZ13","rawCanonicalId":null},"summary":{"shortDescription":"Infineon FL-P series, S25FL129P0XBHIZ13, 128 Mbit NOR flash, Quad SPI interface, 104 MHz clock, 2.7–3.6 V supply, 16M × 8 organization, 24-TBGA (8×6 mm), -40 to 85 °C.","salesMarkdown":"## 128 Mbit Quad SPI NOR flash — what it does The Infineon S25FL129P0XBHIZ13 is a 128 Mbit NOR flash memory from the FL-P series, organized 16M × 8 and accessed through a Quad SPI interface clocked at 104 MHz. It operates on a 2.7 V to 3.6 V supply and is rated for -40 to 85 °C industrial temperature range. The 24-TBGA (8×6 mm) footprint suits compact embedded designs where code shadowing or data logging demands fast read throughput from a non-volatile store. ## 104 MHz Quad SPI — what the clock rating means for the design The 104 MHz clock frequency on the Quad SPI interface delivers read throughput sufficient for execute-in-place (XIP) code shadowing or high-speed firmware updates. For a design already locked to this FL-P series footprint, the Quad I/O mode reduces pin count versus a parallel NOR flash, saving board area on the 24-ball BGA. If your system can tolerate a slower read rate, a single-SPI NOR flash in the same density would free up three I/O lines, but the Quad interface is the faster path for latency-sensitive boot sequences. The 24-TBGA (8×6 mm) package is a fine-pitch BGA requiring controlled solder-profile reflow and X-ray inspection for voiding. Storage temperature exceeds the operating range, so the part can survive the reflow cycle and handling between builds.","metaTitle":"S25FL129P0XBHIZ13 Infineon 128 Mbit NOR Flash, Quad SPI, 104 MHz","metaDescription":"S25FL129P0XBHIZ13 128 Mbit NOR Flash, Quad SPI, 2.7-3.6 V, -40 to 85 °C, 24-TBGA. Obsolete — sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"title":"S25FL129P0XBHIZ13","Series":"FL-P","Package":"Tape & Reel (TR)","Technology":"FLASH - NOR","Memory Size":"128Mbit","Memory Type":"Non-Volatile","Memory Format":"FLASH","Mounting Type":"Surface Mount","Package / Case":"24-TBGA","Clock Frequency":"104 MHz","lifecycle_stage":"eol_hot","Memory Interface":"SPI - Quad I/O","Voltage - Supply":"2.7V ~ 3.6V","Base Product Number":"S25FL129","Memory Organization":"16M x 8","Operating Temperature":"-40°C~85°C(TA)","Supplier Device Package":"24-BGA (8x6)","Write Cycle Time - Word, Page":"5µs, 3ms"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/ccb237c2a38e68c2a9dc926a949a53f9.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Does the 24-TBGA foot print match any active 128Mbit Quad SPI NOR alternatives?","answer":"Pinout and ball-pitch compatibility cannot be asserted without a cited cross-reference entry. The BHIZ13 suffix encodes speed grade, voltage, and boot configuration — any alternate must match those bits exactly or the boot vector breaks silently. A layout spin and second-source qualification are required before dropping in a substitute."},{"question":"Does the 3.3 V rail give enough headroom at cold startup for 104 MHz Quad I/O operation?","answer":"At 3.3 V ±5% the rail spans 3.135–3.465 V, which clears the 2.7 V minimum comfortably at room temperature. At -40 °C cold start the margin is present but not generous; a low-dropout regulator with tight cold-temperature performance is the conservative design call."},{"question":"What does the -40 to 85 °C rating mean for application fit?","answer":"The S25FL129P0XBHIZ13 is rated to -40 to 85 °C — commercial/industrial grade, not automotive. It covers indoor industrial control modules and non-under-hood equipment but does not meet AEC-Q100 thresholds. Automotive under-hood or exterior applications need an automotive-qualified alternative."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/S25FL129P0XBHIZ13","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/S25FL129P0XBHIZ13 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}