{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S25FL128SDPBHVC00","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"S25FL128SDPBHVC00","canonicalUrl":"https://icboms.com/infineon/S25FL128SDPBHVC00","factsUrl":"https://icboms.com/api/mcp/products/S25FL128SDPBHVC00","rawCanonicalId":null},"summary":{"shortDescription":"Infineon FL-S series, S25FL128SDPBHVC00, 128 Mbit NOR Flash, 66 MHz Quad SPI, 2.7-3.6 V, -40 to 105 °C, 24-TBGA (8x6), Tray.","salesMarkdown":"It uses a Quad SPI interface (SPI - Quad I/O) clocked at 66 MHz, which gives a read throughput high enough for execute-in-place (XIP) code shadowing or fast firmware boot in embedded systems. Packaged in a 24-ball TBGA (8 mm x 6 mm), it suits space-constrained designs where a small footprint matters. The 66 MHz clock frequency on the Quad I/O interface delivers a raw bit rate of 264 Mbps (66 MHz x 4 I/Os). For a firmware engineer, this means the part can sustain fast code shadowing into RAM or even direct XIP with acceptable latency, depending on the system bus speed. The SPI - Quad I/O interface is backward-compatible with standard SPI, so a legacy controller that only supports single-bit SPI will still work, but you leave three-quarters of the throughput on the table. If your MCU has a Quad SPI peripheral, enable it — the difference in boot time is measurable. The 24-TBGA (8x6) package is a fine-pitch BGA — the rework lab should verify the ball layout against the board footprint before stenciling; the supplier device package code is 24-BGA (8x6). Surface-mount only, no through-hole option. That means no last-time-buy clock is ticking, and the part is eligible for new designs. No planned obsolescence risk on this code today.","metaTitle":"S25FL128SDPBHVC00 NOR Flash, 128 Mbit, Quad SPI, 66 MHz","metaDescription":"S25FL128SDPBHVC00 from Infineon (Cypress) FL-S series, 128 Mbit NOR Flash, 66 MHz Quad SPI, 2.7-3.6 V, -40 to 105 °C, 24-BGA.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Mfr":"Infineon Technologies","Series":"FL-S","Package":"Tray","Technology":"FLASH - NOR","Memory Size":"128Mbit","Memory Type":"Non-Volatile","Memory Format":"FLASH","Mounting Type":"Surface Mount","Package / Case":"24-TBGA","Product Status":"Active","Clock Frequency":"66 MHz","lifecycle_stage":"eol_hot","Memory Interface":"SPI - Quad I/O","Voltage - Supply":"2.7V ~ 3.6V","Base Product Number":"S25FL128","Memory Organization":"16M x 8","Operating Temperature":"-40°C ~ 105°C (TA)","Supplier Device Package":"24-BGA (8x6)","Write Cycle Time - Word, Page":"-"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.0475","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"Is S25FL128SDPBHVC00 compatible with Quad SPI?","answer":"Yes, the memory interface is SPI - Quad I/O, meaning it supports standard SPI and Quad SPI modes. At 66 MHz the Quad mode delivers a 264 Mbps read throughput."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/S25FL128SDPBHVC00","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/S25FL128SDPBHVC00 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}