{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S25FL128P0XMFI011M","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"S25FL128P0XMFI011M","canonicalUrl":"https://icboms.com/infineon/S25FL128P0XMFI011M","factsUrl":"https://icboms.com/api/mcp/products/S25FL128P0XMFI011M","rawCanonicalId":null},"summary":{"shortDescription":"Infineon Cypress FL-P series, S25FL128P0XMFI011M, 128Mbit NOR Flash, SPI interface, 104 MHz clock, 2.7V–3.6V supply, 16-SOIC, -40°C to 85°C.","salesMarkdown":"It uses a standard SPI serial interface and is rated for a 104 MHz clock. This class of SPI NOR Flash is commonly used for code storage, firmware shadowing, and configuration data in embedded systems — microcontrollers, FPGAs, DSPs, and SoCs that boot from serial flash. ## 104 MHz SPI — read throughput and bus margin The 104 MHz SPI clock rate is the maximum read clock for this device. At that speed, the serial interface delivers roughly 13 MB/s in single-SPI mode (one data bit per clock). For a system that executes code directly from the flash (XIP), the clock speed sets the instruction-fetch bandwidth. The 104 MHz ceiling is competitive with other SPI NOR Flash parts of this generation, but note that this part does not support dual/quad SPI modes — it is a single-SPI-only device, so the read throughput is limited to one bit per cycle. If your design requires faster read-back for code shadowing or over-the-air updates, a quad-SPI or dual-SPI part would be a better fit. That means Infineon/Cypress has stopped production and no further factory orders are being accepted. The only supply channel is the surplus and independent distribution market — broker stock, factory overruns, and date-code-located inventory. There is no official successor or recommended replacement recorded in the available lifecycle data. For a production BOM, this part carries last-time-buy risk: once the remaining distributor and broker stock is consumed, no new units will be available. If you need a pin-compatible alternative, look at the broader FL-P series or the S25FL128S family (which adds quad-SPI support), but confirm the exact footprint and command set before swapping. The device is supplied in a 16-lead SOIC package with a 7.50 mm body width (the 0.295\" wide-body variant). It is a surface-mount part, intended for reflow soldering. The shipping medium is Tray. For PCB layout, the footprint follows the standard JEDEC MS-013 variation for wide-body SOIC-16. No thermal pad or exposed paddle — the package is a standard plastic SOIC with leads on a 1.27 mm pitch.","metaTitle":"S25FL128P0XMFI011M 128Mbit NOR Flash, 104 MHz SPI, 16-SOIC","metaDescription":"S25FL128P0XMFI011M is an Infineon Cypress 128Mbit NOR Flash with SPI interface, 104 MHz clock, 16-SOIC package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Mfr":"Infineon Technologies","Series":"FL-P","Package":"Tray","Technology":"FLASH - NOR","Memory Size":"128Mbit","Memory Type":"Non-Volatile","Memory Format":"FLASH","Mounting Type":"Surface Mount","Package / Case":"16-SOIC (0.295\\\", 7.50mm Width)","Product Status":"Obsolete","Clock Frequency":"104 MHz","lifecycle_stage":"eol_hot","Memory Interface":"SPI","Voltage - Supply":"2.7V ~ 3.6V","Base Product Number":"S25FL128","Memory Organization":"16M x 8","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"16-SOIC","Write Cycle Time - Word, Page":"3ms"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/cdaf585ec4b46ebc99a4bae5de0e61f0.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is S25FL128P0XMFI011M obsolete and what is the recommended replacement?","answer":"Yes, the part is listed as Obsolete. No official replacement is recorded in the available lifecycle data. For a pin-compatible alternative, consider the S25FL128S family (which adds quad-SPI support), but verify the command set and timing compatibility against your design."},{"question":"Does S25FL128P0XMFI011M support dual/quad SPI?","answer":"No. The memory interface is standard SPI only — single data line per direction. Dual-SPI and quad-SPI modes are not supported on this part."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/S25FL128P0XMFI011M","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/S25FL128P0XMFI011M when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}