{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S25FL032P0XMFI011","brand":"Infineon Technologies","brandSlug":"infineon","productSlug":"S25FL032P0XMFI011","canonicalUrl":"https://icboms.com/infineon/S25FL032P0XMFI011","factsUrl":"https://icboms.com/api/mcp/products/S25FL032P0XMFI011","rawCanonicalId":null},"summary":{"shortDescription":"Cypress FL-P series, S25FL032P0XMFI011, 32Mbit NOR Flash, SPI Quad I/O interface, 104 MHz clock, 2.7V-3.6V supply, -40°C to 85°C, 8-SOIC surface mount.","salesMarkdown":"## 32 Mbit NOR Flash with Quad-SPI — what it delivers The 104 MHz clock rate with Quad I/O yields a practical read throughput that supports execute-in-place (XIP) code execution or fast firmware staging for an external MCU or FPGA. The memory operates from a single 2.7V to 3.6V supply, covering the standard 3.3V rail with enough headroom for brownout conditions. Write-cycle timing is 5 µs for a word and 3 ms for a page, which is fast enough for OTA update staging and configuration parameter storage. The FL-P series has been superseded by newer NOR Flash families with higher density and faster interfaces. ## 104 MHz Quad I/O — real-world throughput for the bus The 104 MHz clock frequency with Quad I/O interface is the headline performance spec. At 104 MHz with four data lines, the sustained read throughput approaches 52 MB/s in fast-read quad mode. That is enough to feed a 32-bit MCU executing code directly from the flash (XIP) without a separate RAM copy for most control-loop and protocol-stack workloads. The Quad I/O mode uses the same four pins as standard SPI but reconfigures them as bidirectional data lines — no extra PCB traces needed. The 5 µs word-program time and 3 ms page-program time mean that writing a full 256-byte page takes about 3 ms. For OTA update scenarios where a 1 MB firmware image is written sector by sector, budget roughly 12 seconds for the erase and program cycle, assuming 64 KB sector erase at typical 1-second-per-sector rates. ## Package and supply — fits standard 3.3V SPI Flash footprints The supply range of 2.7V to 3.6V covers the 3.3V nominal rail with tolerance for transients down to 2.7V — useful for battery-backed or capacitor-held supplies during power loss.","metaTitle":"S25FL032P0XMFI011 32Mbit SPI Flash, 104 MHz, Obsolete","metaDescription":"Cypress S25FL032P0XMFI011 32Mbit NOR Flash, SPI Quad I/O at 104 MHz, 2.7-3.6V, -40 to 85°C, 8-SOIC.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Mfr":"Infineon Technologies","Series":"FL-P","Package":"Tube","Technology":"FLASH - NOR","Memory Size":"32Mbit","Memory Type":"Non-Volatile","Memory Format":"FLASH","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.209\\\", 5.30mm Width)","Product Status":"Obsolete","Clock Frequency":"104 MHz","lifecycle_stage":"eol_hot","Memory Interface":"SPI - Quad I/O","Voltage - Supply":"2.7V ~ 3.6V","Base Product Number":"S25FL032","Memory Organization":"4M x 8","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"8-SOIC","Write Cycle Time - Word, Page":"5µs, 3ms"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.0600","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/fb0dd1ac181dadaaee76ee9cc4a1c3f1.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the replacement for S25FL032P0XMFI011?","answer":"For a drop-in replacement, verify the package (8-SOIC 5.30 mm), supply voltage (2.7V to 3.6V), and SPI Quad I/O command set against any proposed alternate."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/infineon/S25FL032P0XMFI011","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/infineon/S25FL032P0XMFI011 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}