{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"RN4907FE,LXHF(CT","brand":"Toshiba Semiconductor","brandSlug":"toshiba","productSlug":"RN4907FELXHFCT","canonicalUrl":"https://icboms.com/toshiba/RN4907FELXHFCT","factsUrl":"https://icboms.com/api/mcp/products/RN4907FE%2CLXHF(CT","rawCanonicalId":null},"summary":{"shortDescription":"Toshiba RN4907FE,LXHF(CT — Automotive AEC-Q101 dual pre-biased transistor, 1 NPN + 1 PNP, 50 V VCEO, 100 mA Ic, 10kΩ base / 47kΩ emitter-base resistors, SOT-563 surface mount.","salesMarkdown":"## Dual pre-biased transistor for automotive switching The Toshiba RN4907FE,LXHF(CT packs one NPN and one PNP pre-biased transistor into a single SOT-563 package, with integrated 10kΩ base resistors (R1) and 47kΩ emitter-base resistors (R2). Rated for 50 V collector-emitter breakdown and 100 mA continuous collector current, it is designed for automotive-grade switching loads up to 100 mW total power dissipation. AEC-Q101 qualification means this part is screened for automotive reliability — under-hood or cabin-module environments, with controlled lot traceability and extended temperature performance. ## Bias resistors save board space The 10kΩ base resistor and 47kΩ emitter-base resistor eliminate two external passives per transistor channel. For a complementary pair that is four resistors you do not place or inspect — a real BOM-density win on a cramped ECU or sensor PCB. With a minimum DC current gain of 80 at 10 mA collector current and 5 V VCE, the integrated bias network drives 5 mA loads with a typical VCE(sat) of 300 mV at 250 µA base current — clean saturation for logic-level switching. ## 100 mA collector current — where it fits The 100 mA maximum continuous collector current suits low-to-medium current switching: relay coils, LED arrays, small solenoids, or as a gate-drive buffer for a power MOSFET. The 500 nA maximum collector cut-off current keeps off-state leakage negligible in battery- or ignition-powered circuits. Transition frequency of 200 MHz (NPN) and 250 MHz (PNP) is fast enough for PWM switching up to several megahertz — no speed bottleneck in a typical automotive load-switch or signal-level translator application. ## Package and sourcing reality It is specified for surface-mount assembly in the SOT-563 or SOT-666 footprint (supplier device package ES6).","metaTitle":"RN4907FE,LXHF(CT AEC-Q101 dual NPN/PNP pre-biased transistor","metaDescription":"Automotive AEC-Q101 qualified dual pre-biased transistor. 1 NPN + 1 PNP in SOT-563, 50 V VCEO, 100 mA Ic, integrated 10kΩ/47kΩ resistors.","metaKeywords":null},"attributes":{"series":"Automotive, AEC-Q101","packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"Automotive, AEC-Q101","Package":"Tape & Reel (TR); Cut Tape (CT)","Power - Max":"100mW","Mounting Type":"Surface Mount","Package / Case":"SOT-563, SOT-666","Transistor Type":"1 NPN, 1 PNP - Pre-Biased (Dual)","lifecycle_stage":"eol_hot","Resistor - Base (R1)":"10kOhms","Frequency - Transition":"200MHz, 250MHz","Supplier Device Package":"ES6","Resistor - Emitter Base (R2)":"47kOhms","Vce Saturation (Max) @ Ib, Ic":"300mV @ 250µA, 5mA","Current - Collector (Ic) (Max)":"100mA","Current - Collector Cutoff (Max)":"500nA","DC Current Gain (hFE) (Min) @ Ic, Vce":"80 @ 10mA, 5V","Voltage - Collector Emitter Breakdown (Max)":"50V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.39","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.39000","currency":"USD"},{"qty":10,"price":"$0.29100","currency":"USD"},{"qty":100,"price":"$0.18130","currency":"USD"},{"qty":500,"price":"$0.12402","currency":"USD"},{"qty":1000,"price":"$0.09540","currency":"USD"},{"qty":2000,"price":"$0.08586","currency":"USD"},{"qty":4000,"price":"$0.08586","currency":"USD"},{"qty":8000,"price":"$0.08109","currency":"USD"},{"qty":12000,"price":"$0.07394","currency":"USD"},{"qty":28000,"price":"$0.06917","currency":"USD"},{"qty":100000,"price":"$0.06750","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/8eba2b1b80280475caf2f12738574ed5.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is RN4907FE,LXHF(CT AEC-Q101 qualified?","answer":"Yes, this part is listed under the Automotive, AEC-Q101 series, confirming qualification to the automotive discrete semiconductor reliability standard."},{"question":"What is the maximum current (Ic) of RN4907FE?","answer":"The maximum continuous collector current (Ic) is 100 mA, with a maximum collector-emitter breakdown voltage of 50 V."},{"question":"What is the replacement or equivalent for RN4907FE?","answer":"For a pin-compatible alternative, compare the SOT-563 footprint and the 10kΩ / 47kΩ resistor values against other AEC-Q101 dual pre-biased transistors in the same package."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/toshiba/RN4907FELXHFCT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/toshiba/RN4907FELXHFCT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}