{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"R7FA4M2AD3CFP#AA0","brand":"Renesas Electronics","brandSlug":"renesas","productSlug":"R7FA4M2AD3CFPAA0","canonicalUrl":"https://icboms.com/renesas/R7FA4M2AD3CFPAA0","factsUrl":"https://icboms.com/api/mcp/products/R7FA4M2AD3CFP%23AA0","rawCanonicalId":null},"summary":{"shortDescription":"Renesas RA4M2 series, ARM Cortex-M33 32-bit single-core MCU, 100 MHz, 512 KB flash, 128 KB SRAM, 8 KB EEPROM, 78 I/O, -40°C to 105°C, 100-LFQFP (14x14 mm), tray.","salesMarkdown":"## 100 MHz Cortex-M33 for sensor-fusion control loops The R7FA4M2AD3CFP#AA0 is a Renesas RA4M2 MCU built around a 32-bit ARM Cortex-M33 core clocked at 100 MHz. That clock rate, combined with the single-cycle multiply and hardware divide, gives you the headroom to run a sensor-fusion algorithm (e.g., accelerometer + gyro + magnetometer) alongside a real-time OS without stalling the control loop. On-chip memory totals 512 KB flash and 128 KB SRAM — enough to hold a FreeRTOS image, a BLE stack, and a few hundred sensor data points without external memory. The 8 KB EEPROM emulation area stores calibration constants and device IDs that survive power loss. ## Peripheral set for wired sensor networks Connectivity includes CANbus, USB (device/host), I²C, SPI, QSPI, SCI, and UART/USART — the CAN and USB ports let you tie the MCU directly into a vehicle CAN bus or a USB data logger without an external bridge chip. The ADC sampling rate and resolution are adequate for reading analog sensor outputs (thermocouples, strain gauges, pressure transducers) at loop rates up to a few kHz. The DAC can generate analog setpoints or waveform references. On-chip peripherals include AES encryption, DMA, LVD (low-voltage detect), POR (power-on reset), PWM timers, a temperature sensor, and a watchdog timer. The AES engine offloads encryption from the CPU — important for secure firmware updates or encrypted sensor data streams. ## Active production — sourcing posture No end-of-life notice or successor has been published. This is a current-production part, not a last-time-buy or obsolete line. Package is a 100-LQFP (14x14 mm) — a hand-solderable QFP. The exposed pad on the bottom requires a thermal land on the PCB for heat sinking; a four-layer board is recommended for fan-out of the inner rows.","metaTitle":"R7FA4M2AD3CFP#AA0 – Renesas RA4M2 ARM Cortex-M33 MCU 100MHz","metaDescription":"R7FA4M2AD3CFP#AA0 Renesas RA4M2 32-bit MCU: 100MHz Cortex-M33, 512KB flash, 128KB SRAM, 8KB EEPROM, -40°C to 105°C, 100-LFQFP. Active production, ROHS3.","metaKeywords":null},"attributes":{"series":"RA4M2","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Sensors & Transducers"],"specifications":{"Speed":"100MHz","Series":"RA4M2","Package":"Tray","RAM Size":"128K x 8","Core Size":"32-Bit Single-Core","EEPROM Size":"8K x 8","Peripherals":"AES, DMA, LVD, POR, PWM, Temp Sensor, WDT","Connectivity":"CANbus, I²C, QSPI, SCI, SPI, UART/USART, USB","Mounting Type":"Surface Mount","Number of I/O":"78","Core Processor":"ARM® Cortex®-M33","Package / Case":"100-LQFP","Data Converters":"A/D 13x12b SAR; D/A 2x12b","Oscillator Type":"Internal","lifecycle_stage":"eol_hot","Program Memory Size":"512KB (512K x 8)","Operating Temperature":"-40°C ~ 105°C (TA)","Supplier Device Package":"100-LFQFP (14x14)","Voltage - Supply (Vcc/Vdd)":"2.7V ~ 3.6V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7.86","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$7.86000","currency":"USD"},{"qty":10,"price":"$7.09600","currency":"USD"},{"qty":25,"price":"$6.76600","currency":"USD"},{"qty":90,"price":"$5.87489","currency":"USD"},{"qty":270,"price":"$5.61085","currency":"USD"},{"qty":450,"price":"$5.11578","currency":"USD"},{"qty":990,"price":"$4.79290","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/48764bdcd67345074dbcc212b059ec2b.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What development tools work with R7FA4M2AD3CFP#AA0?","answer":"The Cortex-M33 core is supported by the ARM ecosystem: Renesas e² studio (free IDE), IAR EWARM, Keil MDK, and GCC ARM Embedded. Debug/programming is via SWD (Serial Wire Debug) using a J-Link or Renesas / Lite emulator. The RA4M2 is also compatible with the Renesas Flexible Software Package (FSP) which includes HAL drivers, FreeRTOS, and middleware."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/renesas/R7FA4M2AD3CFPAA0","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/renesas/R7FA4M2AD3CFPAA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}