{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"PS9513L2-AX","brand":"Renesas Electronics","brandSlug":"renesas","productSlug":"PS9513L2-AX","canonicalUrl":"https://icboms.com/renesas/PS9513L2-AX","factsUrl":"https://icboms.com/api/mcp/products/PS9513L2-AX","rawCanonicalId":null},"summary":{"shortDescription":"Renesas PS9513L2-AX optocoupler, 1-channel DC input, open collector output, 5000Vrms isolation, 1Mbps data rate, 15mA output current, 8-DIP Gull Wing SMD package, -40°C to 100°C.","salesMarkdown":"## 5000Vrms isolation for industrial signal isolation The Renesas PS9513L2-AX is a single-channel optocoupler with a DC-coupled input LED and an open-collector output transistor, rated for 5000Vrms isolation voltage. It's the part you reach for when a PLC digital input, motor-drive fault feedback, or industrial sensor interface needs galvanic isolation between a 4.5V to 20V logic rail and a noisy field side. The open collector output pulls up to whatever supply the receiving logic uses, so it bridges 5V MCU inputs and 24V control logic without a level shifter. Data rate is specified at 1Mbps, with a maximum propagation delay of 750ns low-to-high and 500ns high-to-low. That's not a high-speed digital isolator — you wouldn't run SPI or CAN FD through it — but it's plenty for 1kHz PWM gate-drive feedback, relay status readback, or 50/60Hz line-sync detection where the timing budget is in microseconds, not nanoseconds. ## 15kV/µs CMTI — survives the switching node Common-mode transient immunity is rated at a minimum of 15kV/µs. That's the spec that keeps the output from glitching when a 600V IGBT switches next to the optocoupler. In a motor-drive or inverter application, the isolation barrier sees a fast voltage slew between primary and secondary grounds; if the CMTI is too low, the output toggles falsely and the controller reads a phantom fault. 15kV/µs is a solid floor for industrial drives and servo amplifiers. ## Open collector output with 15mA sink The output transistor sinks up to 15mA continuous. That's enough to drive a standard optocoupler load — an MCU GPIO pin, a relay coil with an external transistor, or a 5V logic input through a 330Ω pull-up resistor. The forward LED needs 1.65V typical and can take up to 25mA, so it interfaces directly with 3.3V or 5V logic without a series resistor calculation beyond the usual LED current limit. ## 8-DIP Gull Wing — standard SMD footprint Packaged in an 8-SMD Gull Wing (8-DIP Gull Wing) surface-mount case. This is the same footprint used by the NEC/CEL PS95xx series and many Renesas optocouplers, so it's a drop-in replacement for existing layouts that use that package. The gull-wing leads give good visual solder-joint inspection access, which matters for medical or industrial products that get AOI. ## Active lifecycle, ROHS3 compliant No last-time-buy risk on the horizon for this line.","metaTitle":"PS9513L2-AX Optocoupler, 5000Vrms, 1Mbps","metaDescription":"Renesas PS9513L2-AX optocoupler: 5000Vrms isolation, 1Mbps data rate, open collector output, 15mA drive. Active lifecycle, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Optoisolators"],"specifications":{"Package":"Tube","Data Rate":"1Mbps","Input Type":"DC","Output Type":"Open Collector","Mounting Type":"Surface Mount","Package / Case":"8-SMD, Gull Wing","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 20V","Number of Channels":"1","Voltage - Isolation":"5000Vrms","Operating Temperature":"-40°C ~ 100°C","Inputs - Side 1/Side 2":"1/0","Supplier Device Package":"8-DIP Gull Wing","Current - Output / Channel":"15 mA","Voltage - Forward (Vf) (Typ)":"1.65V","Current - DC Forward (If) (Max)":"25mA","Propagation Delay tpLH / tpHL (Max)":"750ns, 500ns","Common Mode Transient Immunity (Min)":"15kV/µs"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.29","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$4.29000","currency":"USD"},{"qty":10,"price":"$3.03300","currency":"USD"},{"qty":100,"price":"$2.48420","currency":"USD"},{"qty":500,"price":"$2.09424","currency":"USD"},{"qty":1000,"price":"$1.92092","currency":"USD"},{"qty":2000,"price":"$1.84148","currency":"USD"},{"qty":5000,"price":"$1.80538","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/20780c29f5cb74d9aec6e0a95aadf2f8.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is PS9513L2-AX RoHS compliant?","answer":"Yes, the PS9513L2-AX is listed as ROHS3 compliant, covering the latest RoHS exemption categories."},{"question":"Can PS9513L2-AX be used with a 5V supply?","answer":"Yes. The supply voltage range is 4.5V to 20V, so 5V is well within the operating window. The open collector output pulls up to whatever the receiving logic rail is, so it interfaces directly with 5V MCU inputs or 24V PLC modules."},{"question":"What is the propagation delay of PS9513L2-AX?","answer":"Maximum propagation delay is 750ns low-to-high and 500ns high-to-low at the rated 1Mbps data rate. That's the spec to budget for in your timing closure — about 1.25µs total worst-case round-trip through the isolator."},{"question":"Does PS9513L2-AX have a direct equivalent?","answer":"There is no pin-compatible second source listed in the official records. The RV1S9062ACCSP-10YV#KC0 is a functional alternative from Renesas with a 15Mbps data rate and push-pull output, but it has a different output type (totem pole vs open collector) and a different package variant — verify the footprint and output drive requirements before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/renesas/PS9513L2-AX","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/renesas/PS9513L2-AX when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}