{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"PS9013-Y-AX","brand":"Renesas Electronics","brandSlug":"renesas","productSlug":"PS9013-Y-AX","canonicalUrl":"https://icboms.com/renesas/PS9013-Y-AX","factsUrl":"https://icboms.com/api/mcp/products/PS9013-Y-AX","rawCanonicalId":null},"summary":{"shortDescription":"Optocoupler, 1-channel, open collector output, 5000Vrms isolation, 1Mbps data rate, 50kV/µs CMTI, 6-SOIC 5-lead LSOP package, Tape & Reel.","salesMarkdown":"## 5000Vrms isolation in a 5-lead SOIC The PS9013-Y-AX is a single-channel optocoupler delivering 5000Vrms galvanic isolation in a compact 6-SOIC package with 5 leads (5-LSOP). That isolation rating covers reinforced insulation for mains-connected circuits per IEC 60950-1 and IEC 62368-1 — it holds off transient overvoltages in motor drives, grid-tied inverters, and medical power supplies without requiring a separate isolation barrier on the PCB. The 4.5V to 25V supply range on the output side means it can also drive a relay coil or a PLC input module without a level translator. ## CMTI and propagation delay — the timing budget Common-mode transient immunity of 50 kV/µs minimum means the output does not glitch when a 1000V/ns edge jumps across the isolation barrier. In a half-bridge gate driver application, that CMTI prevents the low-side optocoupler from falsely triggering the high-side switch during the dead-time commutation — a failure mode that costs a leg of IGBTs. Propagation delay is 750 ns max low-to-high and 500 ns max high-to-low. The asymmetry matters for pulse-width modulated signals: a 1 MHz square wave with 50% duty cycle sees the on-time stretched by 250 ns at the output, shifting the effective duty cycle. For switching frequencies below 100 kHz the error is under 2.5%, but above that the controller must compensate or use a symmetric-delay isolator. At 1 Mbps data rate the bit period is 1 µs. The 750 ns tpLH eats 75% of the bit period — the receiver must sample near the end of the window. For UART or SPI isolation at 1 Mbps, keep the bus loading light and the trace capacitance under 50 pF to avoid adding rise-time margin on top of the propagation delay. ## Temperature grade and supply flexibility The 4.5V minimum supply on the output side means it runs from a 5V rail with 500 mV headroom — enough margin for a 5% tolerance supply. The 25V maximum covers 24V nominal industrial rails with 4V of transient headroom. Forward voltage is 1.56V typical at 25°C with a 25 mA absolute maximum forward current. At 15 mA forward current the LED voltage drop is about 1.4V — the input-side series resistor should be sized for the minimum supply voltage to guarantee the LED turns on across temperature. The 1.56V Vf at 25°C rises by roughly -2 mV/°C, so at 125°C the Vf drops to about 1.36V, increasing the LED current by 10% for a fixed resistor. The 7.50 mm body width is the wide-body SOIC footprint — the 0.295-inch row spacing matches the standard 5.08 mm pitch for high-voltage isolation components. The 5-LSOP supplier device package is the same mechanical outline as the 6-SOIC but with one pin omitted (pin 6 is not present).","metaTitle":"PS9013-Y-AX optocoupler, 5000Vrms isolation, 1Mbps, SOIC-5","metaDescription":"PS9013-Y-AX 1-channel optocoupler with 5000Vrms isolation, 50kV/µs CMTI, open collector output, 1Mbps data rate. Active production, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Data Rate":"1Mbps","Input Type":"DC","Output Type":"Open Collector","Mounting Type":"Surface Mount","Package / Case":"6-SOIC (0.295\\\", 7.50mm Width), 5 Leads","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 25V","Number of Channels":"1","Voltage - Isolation":"5000Vrms","Operating Temperature":"-40°C ~ 125°C","Inputs - Side 1/Side 2":"1/0","Supplier Device Package":"5-LSOP","Current - Output / Channel":"15 mA","Voltage - Forward (Vf) (Typ)":"1.56V","Current - DC Forward (If) (Max)":"25mA","Propagation Delay tpLH / tpHL (Max)":"750ns, 500ns","Common Mode Transient Immunity (Min)":"50kV/µs"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5.67","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$5.67000","currency":"USD"},{"qty":10,"price":"$4.00700","currency":"USD"},{"qty":20,"price":"$4.00700","currency":"USD"},{"qty":100,"price":"$3.28180","currency":"USD"},{"qty":500,"price":"$3.00600","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/43f60c982eeec7cee85fb6c2dbb070fd.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the PS9013-Y-AX's data rate and what does it mean for my application?","answer":"The PS9013-Y-AX supports 1 Mbps data rate. At that speed the bit period is 1 µs and the 750 ns propagation delay consumes 75% of the window, so the receiver must sample late in the bit period. For switching frequencies below 100 kHz the delay asymmetry is manageable; above that, compensate in firmware or use a symmetric-delay isolator."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/renesas/PS9013-Y-AX","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/renesas/PS9013-Y-AX when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}