{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"PS2706-1-F3-A","brand":"Renesas Electronics","brandSlug":"renesas","productSlug":"PS2706-1-F3-A","canonicalUrl":"https://icboms.com/renesas/PS2706-1-F3-A","factsUrl":"https://icboms.com/api/mcp/products/PS2706-1-F3-A","rawCanonicalId":null},"summary":{"shortDescription":"Renesas NEPOC PS2706-1-F3-A optoisolator, 1-channel Darlington output, 3750Vrms isolation, 200% min CTR at 1mA, 200mA output, 40V Vce max, AC/DC input, 4-SMD gull wing, -55°C to 100°C.","salesMarkdown":"## Darlington optocoupler for isolated load switching The Renesas PS2706-1-F3-A is a single-channel Darlington-output optocoupler from the NEPOC series, designed for applications requiring galvanic isolation between a low-voltage control side and a higher-voltage load side. Its key differentiator is the 200 mA continuous output current capability — enough to drive a small relay, solenoid, or indicator lamp directly, without an external transistor buffer. The Darlington configuration provides a minimum current transfer ratio of 200% at just 1 mA LED forward current, so a microcontroller GPIO can switch the output with minimal drive current. The AC/DC input type allows the LED to be driven with either polarity or an AC signal, simplifying designs for zero-crossing detection or bipolar control signals. The 3750Vrms isolation voltage rating is the headline safety parameter. It qualifies this optocoupler for basic insulation in mains-referenced circuits — think motor drives, industrial PLC I/O modules, and off-line power supplies where the control logic must be isolated from the 120/230 VAC line. For reinforced insulation applications, you would typically need a part rated 5000Vrms or higher, so check your safety standard (IEC 60950, IEC 62368) before committing this part to a medical or high-reliability mains isolation barrier. The 4-SMD gull-wing package with 4-SOP footprint is a standard optocoupler land pattern, compatible with reflow soldering and pick-and-place assembly. ## 200 µs switching — slow but deliberate Rise and fall times are both 200 µs typical. That is slow — this part is not for high-speed data isolation or PWM switching above a few hundred hertz. It is intended for DC level sensing, relay coil drive, or on/off load control where the switching transient is not time-critical. The 40 V output maximum and 200 mA per-channel rating define the load side: you can switch a 24 V industrial relay or a 12 V indicator lamp, but not a 48 V solenoid or a 5 A contactor. For faster switching or higher voltage, look at a transistor-output optocoupler like the PS2801C-4-V-A (5 µs rise/fall, 300 mV Vce sat) — but that part has only 30 mA output and DC-only input. ROHS3 compliance is confirmed, so it is suitable for EU and global markets without exemption concerns. The NEPOC series is Renesas's standard optocoupler family, and this part number is widely stocked across independent distribution.","metaTitle":"PS2706-1-F3-A NEPOC Optoisolator, 3750Vrms Darlington Output","metaDescription":"PS2706-1-F3-A NEPOC optocoupler: 3750Vrms isolation, 200% min CTR at 1mA, 200mA output, AC/DC input. Active, ROHS3.","metaKeywords":null},"attributes":{"series":"NEPOC","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Optoisolators"],"specifications":{"Series":"NEPOC","Package":"Tape & Reel (TR); Cut Tape (CT)","Input Type":"AC, DC","Output Type":"Darlington","Mounting Type":"Surface Mount","Package / Case":"4-SMD, Gull Wing","lifecycle_stage":"eol_hot","Number of Channels":"1","Voltage - Isolation":"3750Vrms","Vce Saturation (Max)":"1V","Operating Temperature":"-55°C ~ 100°C","Rise / Fall Time (Typ)":"200µs, 200µs","Voltage - Output (Max)":"40V","Supplier Device Package":"4-SOP","Current - Output / Channel":"200mA","Current Transfer Ratio (Min)":"200% @ 1mA","Voltage - Forward (Vf) (Typ)":"1.1V","Current - DC Forward (If) (Max)":"50 mA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.4","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.40000","currency":"USD"},{"qty":10,"price":"$0.88400","currency":"USD"},{"qty":100,"price":"$0.65400","currency":"USD"},{"qty":500,"price":"$0.60096","currency":"USD"},{"qty":1000,"price":"$0.49490","currency":"USD"},{"qty":3500,"price":"$0.47015","currency":"USD"},{"qty":7000,"price":"$0.45955","currency":"USD"},{"qty":10500,"price":"$0.44894","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/9126dd3b38c37fde442d5767eac62eab.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the current transfer ratio (CTR) of PS2706-1-F3-A?","answer":"The minimum current transfer ratio is 200% at 1 mA forward current. This means with 1 mA through the LED, the Darlington output can sink at least 2 mA — enough to drive a logic input or a low-power load. At higher forward currents the CTR increases, but the 200% minimum at 1 mA is the spec to design to for worst-case gain margin."},{"question":"Does PS2706-1-F3-A comply with RoHS?","answer":"Yes, it is ROHS3 compliant, meaning it meets the EU RoHS directive with no exemptions for restricted substances."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/renesas/PS2706-1-F3-A","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/renesas/PS2706-1-F3-A when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}