{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"PS2565L2-1-F3-A","brand":"Renesas Electronics","brandSlug":"renesas","productSlug":"PS2565L2-1-F3-A","canonicalUrl":"https://icboms.com/renesas/PS2565L2-1-F3-A","factsUrl":"https://icboms.com/api/mcp/products/PS2565L2-1-F3-A","rawCanonicalId":null},"summary":{"shortDescription":"Renesas NEPOC PS2565L2-1-F3-A single-channel transistor-output optocoupler, 5000Vrms isolation, 80V/50mA output, 80-400% CTR at 5mA, 3µs/5µs rise/fall, -55 to 100°C, 4-SMD Gull Wing package.","salesMarkdown":"## Single-channel optocoupler with 5 kV isolation for industrial isolation barriers The Renesas PS2565L2-1-F3-A is a single-channel transistor-output optocoupler in the NEPOC series, housed in a 4-SMD Gull Wing package for surface-mount assembly. It provides 5000Vrms galvanic isolation between input and output, making it a fit for breaking ground loops and protecting low-voltage logic from high-side transients in industrial controls, power supplies, and motor drives. The input accepts both AC and DC drive, which simplifies polarity-insensitive designs — you can wire the LED in either direction or feed it from an AC-coupled signal without an external bridge. Current transfer ratio spans 80% to 400% at a forward current of 5 mA. That wide spread means the design must be biased for the minimum CTR to guarantee saturation under worst-case LED aging and temperature; the upper end gives headroom for low-drive applications but also sets the switching speed floor — higher CTR parts tend to switch slower. Typical rise and fall times are 3 µs and 5 µs respectively, which limits practical switching frequencies to roughly 100 kHz or below. This is not a part for high-speed isolated data links (use a digital isolator for that), but it works well for status feedback, relay drivers, and low-frequency signal isolation where the 3 µs/5 µs edge rates are well within the timing budget. The 100°C ceiling limits use to industrial and commercial equipment rather than engine-bay applications. ## Package, mounting, and compliance The PS2565L2-1-F3-A is supplied in a 4-SMD Gull Wing package for surface-mount reflow assembly. ## Lifecycle and sourcing That part is not a pin-compatible replacement (different channel count and package), but it can serve as a design alternative for multi-channel boards where 2.5 kV isolation is sufficient.","metaTitle":"PS2565L2-1-F3-A NEPOC Optocoupler, 5000Vrms","metaDescription":"PS2565L2-1-F3-A NEPOC single-channel optocoupler, 5000Vrms isolation, 80V/50mA output, 80-400% CTR, -55 to 100°C. Active lifecycle.","metaKeywords":null},"attributes":{"series":"NEPOC","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Optoisolators"],"specifications":{"Series":"NEPOC","Package":"Tape & Reel (TR); Cut Tape (CT)","Input Type":"AC, DC","Output Type":"Transistor","Mounting Type":"Surface Mount","Package / Case":"4-SMD, Gull Wing","lifecycle_stage":"eol_hot","Number of Channels":"1","Voltage - Isolation":"5000Vrms","Vce Saturation (Max)":"300mV","Operating Temperature":"-55°C ~ 100°C","Rise / Fall Time (Typ)":"3µs, 5µs","Voltage - Output (Max)":"80V","Supplier Device Package":"4-SMD","Current - Output / Channel":"50mA","Current Transfer Ratio (Max)":"400% @ 5mA","Current Transfer Ratio (Min)":"80% @ 5mA","Voltage - Forward (Vf) (Typ)":"1.17V","Current - DC Forward (If) (Max)":"80 mA"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.56","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.56000","currency":"USD"},{"qty":10,"price":"$0.98500","currency":"USD"},{"qty":100,"price":"$0.72870","currency":"USD"},{"qty":500,"price":"$0.66964","currency":"USD"},{"qty":1000,"price":"$0.55146","currency":"USD"},{"qty":2000,"price":"$0.52389","currency":"USD"},{"qty":6000,"price":"$0.51207","currency":"USD"},{"qty":10000,"price":"$0.50025","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/5133d1d98ef553b6f270e617aed48317.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is PS2565L2-1-F3-A RoHS compliant?","answer":"Yes, the PS2565L2-1-F3-A is listed as ROHS3 compliant, meeting the current EU RoHS exemption framework for lead-free soldering."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/renesas/PS2565L2-1-F3-A","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/renesas/PS2565L2-1-F3-A when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}