{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OPA569AIDWP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"OPA569AIDWP","canonicalUrl":"https://icboms.com/texas-instruments/OPA569AIDWP","factsUrl":"https://icboms.com/api/mcp/products/OPA569AIDWP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments OPA569AIDWP general-purpose op-amp, single circuit, 2.4 A output per channel, 1.2 MHz GBW, 1.2 V/µs slew rate, rail-to-rail output, 20-HSOIC exposed pad package, tube.","salesMarkdown":"## 2.4 A output op-amp for high-drive loads The OPA569AIDWP is a single-channel, general-purpose operational amplifier from Texas Instruments that delivers 2.4 A of output current per channel — enough to directly drive a motor winding, a solenoid, or a high-power LED string without an external buffer stage. With a gain-bandwidth product of 1.2 MHz and a slew rate of 1.2 V/µs, it is sized for moderate-speed control loops and signal conditioning where the load current dominates the design choice, not the bandwidth. ## Rail-to-rail output and wide supply range The rail-to-rail output stage swings within millivolts of the supply rails, preserving headroom when the load pulls the output near the supply limit — important in a 2.4 A driver where every volt of drop is dissipated as heat in the die. Supply span runs from 2.7 V to 5.5 V, covering single-cell Li-ion through regulated 5 V rails, so the same BOM line serves portable and line-powered designs. Quiescent supply current is 9 mA — the part does not idle hot even when the output is not sourcing load current, which matters in a thermally constrained 20-HSOIC package. ## 20-HSOIC exposed-pad thermal management The 20-SOIC package with exposed pad (0.295-inch body width, 7.50 mm) routes the die's heat through the pad to the PCB copper plane — the layout must include a thermal land and vias to a ground plane to keep the junction temperature within the -40°C to 85°C operating range under continuous 2.4 A load. Surface-mount assembly on the 20-HSOIC footprint; the exposed pad is the primary thermal path, so the solder paste coverage under the pad should match the recommended stencil aperture in the TI application note. ## DC precision for the signal chain Input offset voltage is 500 µV maximum, and input bias current is 1 pA typical at 25°C — the bias current doubles every 10°C, so at 85°C it sits around 64 pA, still negligible for a 10 kΩ source but a factor in a high-impedance sensor front-end. These DC specs mean the OPA569AIDWP can serve as the drive stage in a precision current source or as the output buffer in a DAC signal chain without adding an appreciable error term. ## Active production and compliance The part is ROHS3 Compliant, meeting the latest EU restriction directive without exemption.","metaTitle":"Texas Instruments OPA569AIDWP Op-Amp, 2.4 A Output, 20-HSOIC","metaDescription":"TI OPA569AIDWP general-purpose op-amp, 2.4 A output per channel, 1.2 MHz GBW, rail-to-rail, 20-HSOIC exposed pad. Active, RoHS3 compliant. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"1.2V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"20-SOIC (0.295\\\", 7.50mm Width) Exposed Pad","lifecycle_stage":"eol_hot","Current - Supply":"9mA","Number of Circuits":"1","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"1.2 MHz","Voltage - Input Offset":"500 µV","Supplier Device Package":"20-HSOIC","Current - Output / Channel":"2.4 A","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.43","priceTiers":[{"qty":1,"price":"$11.43000","currency":"USD"},{"qty":10,"price":"$10.32400","currency":"USD"},{"qty":25,"price":"$9.84360","currency":"USD"},{"qty":100,"price":"$8.54720","currency":"USD"},{"qty":250,"price":"$8.16304","currency":"USD"},{"qty":500,"price":"$7.44280","currency":"USD"},{"qty":1000,"price":"$6.79500","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/901a2d08bdc18ecdcb99474c470815b2.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OPA569AIDWP/alternatives.json"},"ai":{"faq":[{"question":"What is the output current capability of OPA569AIDWP?","answer":"The OPA569AIDWP delivers 2.4 A per channel. This is a single-channel op-amp, so the full 2.4 A is available from the single output."},{"question":"What package does OPA569AIDWP come in?","answer":"It is supplied in a 20-SOIC package with an exposed pad (0.295\" body width, 7.50 mm), also referred to as 20-HSOIC. The package is surface-mount and shipped in tube form."},{"question":"What compliance documentation does Texas Instruments provide for OPA569AIDWP?","answer":"Texas Instruments certifies the OPA569AIDWP as ROHS3 Compliant. The active lifecycle status means current datasheets, application notes, and PCN notifications are available from the manufacturer."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/OPA569AIDWP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/OPA569AIDWP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}