{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OPA4992IPWR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"OPA4992IPWR","canonicalUrl":"https://icboms.com/texas-instruments/OPA4992IPWR","factsUrl":"https://icboms.com/api/mcp/products/OPA4992IPWR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments OPA4992 series quad general-purpose op-amp, OPA4992IPWR, 10.6 MHz gain bandwidth, 32 V/µs slew rate, rail-to-rail output, 2.7-40 V supply, 14-TSSOP package.","salesMarkdown":"## 10.6 MHz GBW, 32 V/µs — signal bandwidth for multi-channel control loops The OPA4992IPWR packs four general-purpose op-amps in a single 14-TSSOP package, each channel delivering 10.6 MHz gain-bandwidth product and a 32 V/µs slew rate. That combination supports closed-loop gains up to 10× with a 1 MHz signal bandwidth before the gain-bandwidth ceiling limits phase margin — adequate for multi-channel ADC drivers, active filters, or sensor-conditioning stages in industrial control loops. Rail-to-rail output swing means each channel can drive its full dynamic range into the ADC input or next-stage load without headroom loss, even at the 2.7 V minimum supply. The 65 mA output current per channel is enough to drive moderate capacitive loads or multiple downstream inputs without a separate buffer. ## 2.7 V to 40 V supply span — one BOM line for mixed-voltage boards The 2.7 V to 40 V supply range lets this quad op-amp sit on the same BOM line whether the rail is 3.3 V, 5 V, 12 V, or 24 V. That reduces line-item count in a multi-voltage design — one qualified part number covers the low-voltage analog section and the higher-voltage actuator drive stage. Input bias current is 10 pA typical, and input offset voltage is 210 µV. For a precision sensor front-end with a 10 kΩ source impedance, the bias-current-induced offset is under 0.1 µV — negligible against the 210 µV Vos. The quad density saves board space compared to four single-channel op-amps, though the shared supply pins mean channel-to-channel isolation is limited to the device's own PSRR. ## Active production, -40 to +125 °C — no end-of-life clock ticking The 14-TSSOP package with 0.65 mm pin pitch routes cleanly on a two-layer board for most signal-conditioning layouts. Surface-mount assembly is standard; the tape-and-reel option supports automated pick-and-place. No special thermal pad or exposed paddle — the package dissipates through the leads and the board copper.","metaTitle":"TI OPA4992IPWR quad op-amp, 10.6 MHz, 32 V/µs, 14-TSSOP","metaDescription":"Texas Instruments OPA4992IPWR quad general-purpose op-amp: 10.6 MHz GBW, 32 V/µs slew rate, rail-to-rail output, 2.7-40 V supply, -40 to +125 °C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"Not applicable","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"32V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"14-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"2.4mA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"10 pA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"10.6 MHz","Voltage - Input Offset":"210 µV","Supplier Device Package":"14-TSSOP","Current - Output / Channel":"65 mA","Voltage - Supply Span (Max)":"40 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.97","priceTiers":[{"qty":1,"price":"$2.97000","currency":"USD"},{"qty":10,"price":"$2.66600","currency":"USD"},{"qty":25,"price":"$2.52040","currency":"USD"},{"qty":100,"price":"$2.18420","currency":"USD"},{"qty":250,"price":"$2.07216","currency":"USD"},{"qty":500,"price":"$1.85934","currency":"USD"},{"qty":1000,"price":"$1.56813","currency":"USD"},{"qty":3000,"price":"$1.48972","currency":"USD"},{"qty":6000,"price":"$1.43372","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/05ad84a7f0b5200f183187eb7c438f04.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OPA4992IPWR/alternatives.json"},"ai":{"faq":[{"question":"How does OPA4992IPWR compare to LM6152ACMX/NOPB as a second-source?","answer":"The LM6152ACMX/NOPB is a dual-channel op-amp, not a quad — the OPA4992IPWR has four channels versus two. The LM6152 offers 80 MHz GBW and 30 V/µs slew rate, but its operating temperature range is 0 °C to 70 °C, while the OPA4992IPWR covers -40 °C to +125 °C. The packages differ (14-TSSOP vs the LM6152's package), so a board spin is required for a direct swap. They are not pin-compatible replacements."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/OPA4992IPWR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/OPA4992IPWR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}