{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OPA4209AIPWR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"OPA4209AIPWR","canonicalUrl":"https://icboms.com/texas-instruments/OPA4209AIPWR","factsUrl":"https://icboms.com/api/mcp/products/OPA4209AIPWR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments OPA4209AIPWR, quad general-purpose op-amp, 18 MHz gain-bandwidth, 6.4 V/µs slew rate, rail-to-rail output, 4.5–36 V supply, 14-TSSOP package, -40 to 125 °C.","salesMarkdown":"## Quad op-amp for industrial and automotive signal chains Its 18 MHz gain-bandwidth product and 6.4 V/µs slew rate suit it for active filters, data-acquisition front-ends, and motor-drive current-sense conditioning where four amplifiers share a common supply and temperature environment. The 35 µV typical input offset keeps DC errors low without external trimming, and the 65 mA per-channel output drive can directly swing ADC inputs or small relays. With an 18 MHz gain-bandwidth product, the OPA4209AIPWR maintains a closed-loop gain of 10 up to about 1.8 MHz before the open-loop rolloff cuts in — enough for precision filtering of PWM frequencies or anti-aliasing in 12-bit ADC chains sampling at a few hundred kHz. The 6.4 V/µs slew rate means a 10 V output step settles in roughly 1.6 µs, so large-signal waveforms at tens of kHz stay clean. For designs running near the 125°C end of the range, the 35 µV offset may drift a few microvolts per degree; budget that if the system demands sub-mV accuracy across temperature. The 4.5 V minimum supply lets the quad op-amp run from a 5 V rail common in industrial control, while the 36 V maximum covers 24 V industrial buses with margin. The 65 mA per-channel output current can drive a 50 Ω load to within a volt of the rails, handy for coaxial cable drivers or transformer-coupled stages. Each channel draws 2.2 mA quiescent, so the full quad consumes about 8.8 mA — reasonable for multi-channel data-acquisition boards where power is budgeted per amplifier. The Tape & Reel option suits automated pick-and-place; Cut Tape is available for prototyping. The 0.65 mm pin pitch is standard for TSSOP-14, and the package is RoHS3 compliant. For dual-sourcing resilience, the OPA4374AIPWT is a quad rail-to-rail CMOS op-amp in the same TSSOP-14 footprint, but its 6.5 MHz GBW and 5 V/µs slew rate are a step down in bandwidth — verify the speed margin before substituting.","metaTitle":"TI OPA4209AIPWR Quad Op-Amp, 18 MHz, Rail-to-Rail","metaDescription":"Texas Instruments OPA4209AIPWR quad general-purpose op-amp: 18 MHz GBW, 6.4 V/µs slew rate, 35 µV offset, rail-to-rail output, 4.5–36 V supply.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"6.4V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"14-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"2.2mA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"1 nA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"18 MHz","Voltage - Input Offset":"35 µV","Supplier Device Package":"14-TSSOP","Current - Output / Channel":"65 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7.08","priceTiers":[{"qty":1,"price":"$7.08000","currency":"USD"},{"qty":10,"price":"$6.39700","currency":"USD"},{"qty":25,"price":"$6.09960","currency":"USD"},{"qty":100,"price":"$5.29620","currency":"USD"},{"qty":250,"price":"$5.05820","currency":"USD"},{"qty":500,"price":"$4.61190","currency":"USD"},{"qty":1000,"price":"$4.21050","currency":"USD"},{"qty":2000,"price":"$4.21050","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/f7a532a25c0070317b5911116d5d4c02.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OPA4209AIPWR/alternatives.json"},"ai":{"faq":[{"question":"What is the OPA4209AIPWR's slew rate?","answer":"The listed slew rate is 6.4 V/µs, which supports clean large-signal waveforms up to several tens of kHz."},{"question":"What is the difference between OPA4209AIPWR and OPA4209AID?","answer":"The OPA4209AIPWR is the Tape & Reel / Cut Tape variant in a 14-TSSOP package. The OPA4209AID is typically the same die in an SOIC-8 package (single or dual channel). The quad-channel count and package footprint are the primary differences — verify the package code matches your PCB land pattern."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/OPA4209AIPWR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/OPA4209AIPWR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}