{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OPA336UJ","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"OPA336UJ","canonicalUrl":"https://icboms.com/texas-instruments/OPA336UJ","factsUrl":"https://icboms.com/api/mcp/products/OPA336UJ","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments MicroAmplifier™ series, OPA336UJ, single general-purpose operational amplifier, 100 kHz gain bandwidth, 0.03 V/µs slew rate, 20 µA supply, rail-to-rail output, 8-SOIC package, surface mount, -40°C to 85°C.","salesMarkdown":"## Micro-power precision for battery and sensor front-ends It draws just 20 µA of quiescent current while delivering a 100 kHz gain-bandwidth product and a 0.03 V/µs slew rate — numbers that place it squarely in the micro-power signal-conditioning class, not the high-speed or high-output-drive tier. Output swings rail-to-rail, preserving dynamic range in low-voltage single-supply rails from 2.3 V up to 5.5 V. The 5 mA per-channel output current limits direct drive to light loads — think ADC input buffers or reference inputs, not a headphone or relay coil. Packaged in an 8-SOIC (0.154\" body width), it is a drop-in footprint for any general-purpose op-amp layout in that package. ## 20 µA supply — what it costs in bandwidth and drive The 20 µA supply current is the headline differentiator. For a battery-powered sensor node running on a CR2032 coin cell, that quiescent draw is roughly one-tenth of what a standard 250 µA op-amp would consume, extending months of always-on operation. The trade-off is visible in the 100 kHz gain-bandwidth and 0.03 V/µs slew rate — this part handles DC and low-frequency AC signals (audio below 20 kHz, strain gauge, temperature) but will slew-limit on a 1 kHz square wave above a few hundred millivolts. If the BOM calls for driving a heavier load, the TLV9351IDCKR (3.5 MHz, 20 V/µs, 60 mA output) or TLV9362IDDFR (10.6 MHz, 25 V/µs, 60 mA) are in the same rail-to-rail general-purpose family but consume 600 µA and 2.6 mA respectively — a different power budget entirely.","metaTitle":"OPA336UJ MicroAmplifier op-amp, 100 kHz GBW, 20 µA supply","metaDescription":"TI OPA336UJ single general-purpose op-amp, 100 kHz GBW, 20 µA supply, 60 µV offset, rail-to-rail output, 8-SOIC.","metaKeywords":null},"attributes":{"series":"MicroAmplifier™","packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Series":"MicroAmplifier™","Package":"Bulk","Slew Rate":"0.03V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"20µA","Number of Circuits":"1","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"100 kHz","Voltage - Input Offset":"60 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"5 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.3 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.04","priceTiers":[{"qty":289,"price":"$1.04000","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OPA336UJ/alternatives.json"},"ai":{"faq":[{"question":"What is the typical input offset voltage of OPA336UJ?","answer":"The typical input offset voltage is 60 µV. This level of offset suits precision DC applications such as sensor signal conditioning and bridge amplifiers where microvolt-level errors matter."},{"question":"What is the difference between OPA336UJ and OPA336UA?","answer":"The OPA336UJ and OPA336UA share the same MicroAmplifier™ core — 100 kHz GBW, 20 µA supply, 60 µV offset, rail-to-rail output. The difference is in the packaging and shipping medium: OPA336UJ is supplied in Bulk form, while OPA336UA typically ships in Tape & Reel. Electrically they are identical, so a BOM can use either as long as the packaging format matches the assembly line's feeder requirements."},{"question":"Can OPA336UJ replace OPA336U?","answer":"Yes. The OPA336U and OPA336UJ are the same device — both are single MicroAmplifier™ op-amps in an 8-SOIC package with identical electrical specifications (100 kHz GBW, 20 µA supply, 60 µV offset, rail-to-rail output). The suffix difference reflects packaging or shipping format only. A direct replacement is valid."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/OPA336UJ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/OPA336UJ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}