{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OPA316IDBVR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"OPA316IDBVR","canonicalUrl":"https://icboms.com/texas-instruments/OPA316IDBVR","factsUrl":"https://icboms.com/api/mcp/products/OPA316IDBVR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments OPA316IDBVR, single general-purpose op-amp, 10 MHz gain bandwidth, 6V/µs slew rate, rail-to-rail output, 1.8 V to 5.5 V supply, -40°C to 125°C, SOT-23-5.","salesMarkdown":"## 10 MHz GBW at 400 µA — the power-speed trade-off that matters The supply span runs from 1.8 V minimum to 5.5 V maximum. That 1.8 V floor is the key spec: it lets this part operate directly from a single lithium-ion cell (nominal 3.6 V, down to 2.7 V under load) or a two-cell alkaline stack (3.0 V fresh, 1.8 V dead). Many general-purpose op-amps in this speed class bottom out at 2.7 V or 3.0 V, so the OPA316IDBVR earns its place in portable, battery-powered, and energy-harvesting designs where the rail sags below 2.5 V. The operating temperature range covers -40°C to 125°C, which qualifies this part for under-hood automotive, factory-floor sensor interfaces, outdoor telecom cabinets, and engine-bay electronics. The 125°C upper limit is the threshold where many commercial-grade (85°C) op-amps start to drift or fail; the OPA316IDBVR keeps its input bias current (5 pA typical) and offset voltage (500 µV max) within spec across that full span. ## SOT-23-5 package — fits tight layouts, but plan the reflow profile The small footprint means the thermal pad is absent — all heat dissipates through the leads and the PCB copper. For continuous operation near the 125°C limit, ensure the board has adequate copper pour under the part. The tape-and-reel and cut-tape options cover both production reels and prototype quantities. For the spare-parts storeroom, this means you can stock the reels without worrying about a sudden obsolescence-driven write-off. Store the reels dry — the SOT-23-5 package is MSL 1 (no bake required before reflow if the bag seal is intact), but once the bag is opened, standard moisture-barrier storage is still good practice.","metaTitle":"TI OPA316IDBVR General-Purpose Op-Amp, 10 MHz, Rail-to-Rail","metaDescription":"Texas Instruments OPA316IDBVR single general-purpose op-amp: 10 MHz GBW, 6V/µs slew rate, rail-to-rail output, 1.8 V to 5.5 V supply, -40°C to 125°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"6V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"SC-74A, SOT-753","lifecycle_stage":"eol_hot","Current - Supply":"400µA","Number of Circuits":"1","Current - Input Bias":"5 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"10 MHz","Voltage - Input Offset":"500 µV","Supplier Device Package":"SOT-23-5","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.3","priceTiers":[{"qty":1,"price":"$1.30000","currency":"USD"},{"qty":10,"price":"$1.16300","currency":"USD"},{"qty":25,"price":"$1.10400","currency":"USD"},{"qty":100,"price":"$0.90690","currency":"USD"},{"qty":250,"price":"$0.84780","currency":"USD"},{"qty":500,"price":"$0.74920","currency":"USD"},{"qty":1000,"price":"$0.59148","currency":"USD"},{"qty":3000,"price":"$0.55800","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/e17dd99a0e2073f7a3b794651b15004f.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OPA316IDBVR/alternatives.json"},"ai":{"faq":[{"question":"Can OPA316IDBVR operate at 1.8V supply?","answer":"Yes. The minimum supply voltage is 1.8 V, so it runs from a single 1.8 V rail. At that voltage the gain-bandwidth product and slew rate are derated from the 5 V typical values, but the part is fully functional and the rail-to-rail output still swings close to the rails."},{"question":"What are the alternative op-amps similar to OPA316IDBVR?","answer":"Within the same TI family, the OPA317 (single) and OPA2317 (dual) share the same 1.8 V minimum supply and rail-to-rail output but trade bandwidth (300 kHz) for lower quiescent current (21 µA). None of these are pin-compatible in the same package — check the pinout before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/OPA316IDBVR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/OPA316IDBVR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}