{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OPA2890IDGST","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"OPA2890IDGST","canonicalUrl":"https://icboms.com/texas-instruments/OPA2890IDGST","factsUrl":"https://icboms.com/api/mcp/products/OPA2890IDGST","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments OPA2890IDGST dual voltage-feedback operational amplifier, 250 MHz bandwidth, 400 V/µs slew rate, 2.25 mA per channel supply, 10-VSSOP package, Tape & Reel.","salesMarkdown":"## Active production — still a current BOM line Texas Instruments lists the OPA2890IDGST as Active in its product portfolio, so it remains available for both new designs and production replenishment without a last-time-buy window. The part is ROHS3 compliant, clearing EU and global regulatory requirements for lead-free assembly. ## Dual-channel voltage-feedback amplifier — signal-chain fit Two independent voltage-feedback amplifiers in a single 10-VSSOP package, each drawing 2.25 mA typical supply current — the per-channel quiescent current stays low enough for multichannel boards where the thermal budget is tight. The 400 V/µs slew rate and 250 MHz -3 dB bandwidth mean the amplifier can handle fast pulse edges and wideband signals — think ADC driver front-ends or video distribution where settling time to 0.1% matters more than the raw gain-bandwidth product. Gain-bandwidth product is 120 MHz, so at a closed-loop gain of 10 the small-signal bandwidth is roughly 12 MHz — enough for most sensor-conditioning and communication receiver stages. ## Supply range and temperature grade — board-level flexibility Operates from a single 3 V rail up to 12 V, or split supplies down to ±1.5 V — the same BOM can serve 3.3 V and 5 V systems without a voltage translator. Rated for -40°C to 85°C ambient, so it fits industrial enclosures, outdoor telecom cabinets, and engine-bay-adjacent electronics where the internal temperature stays below the 85°C ceiling. Input offset voltage is 2 mV typical, input bias current 100 nA — adequate for DC-coupled paths where the error budget allows a few millivolts of offset; for sub-millivolt precision, a chopper-stabilized amplifier would be a better fit. ## Package and sourcing — procurement notes Supplied in 10-VSSOP (MSOP-10 compatible) with 0.50 mm pitch — the footprint matches the standard 10-lead MSOP land pattern, so no board spin is needed if you are migrating from another MSOP-10 op-amp. Available in Tape & Reel (TR) for automated pick-and-place or Cut Tape (CT) for prototype runs — order the reel variant for production volumes, the cut tape for bench builds.","metaTitle":"Texas Instruments OPA2890IDGST Dual Op-Amp","metaDescription":"Active-production dual voltage-feedback op-amp. 250 MHz bandwidth, 400V/µs slew rate, 2.25 mA per channel. 10-VSSOP package. Industrial temp range.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"400V/µs","Mounting Type":"Surface Mount","-3db Bandwidth":"250 MHz","Amplifier Type":"Voltage Feedback","Package / Case":"10-TFSOP, 10-MSOP (0.118\\\", 3.00mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"2.25mA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"100 nA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"120 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"10-VSSOP","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"12 V","Voltage - Supply Span (Min)":"3 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.5","priceTiers":[{"qty":1,"price":"$4.50000","currency":"USD"},{"qty":10,"price":"$4.04400","currency":"USD"},{"qty":25,"price":"$3.82320","currency":"USD"},{"qty":100,"price":"$3.31340","currency":"USD"},{"qty":250,"price":"$3.14348","currency":"USD"},{"qty":500,"price":"$2.82064","currency":"USD"},{"qty":1250,"price":"$2.40450","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/528f676d33457cb3a1484c4394e89ed4.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OPA2890IDGST/alternatives.json"},"ai":{"faq":[{"question":"What is the OPA2890IDGST's slew rate and bandwidth?","answer":"The OPA2890IDGST has a slew rate of 400 V/µs and a -3 dB bandwidth of 250 MHz, with a gain-bandwidth product of 120 MHz. These ratings suit high-speed signal conditioning such as ADC driving or video buffering."},{"question":"What package does OPA2890IDGST come in?","answer":"It is offered in a 10-VSSOP package (10-TFSOP, 10-MSOP compatible, 3.00 mm width) and is available in Tape & Reel or Cut Tape."},{"question":"How can I order OPA2890IDGST or check availability?","answer":"The OPA2890IDGST is sourced to order against your BOM quantity through independent distribution. Submit an RFQ for current pricing and lead time confirmation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/OPA2890IDGST","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/OPA2890IDGST when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}