{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OPA241UA","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"OPA241UA","canonicalUrl":"https://icboms.com/texas-instruments/OPA241UA","factsUrl":"https://icboms.com/api/mcp/products/OPA241UA","rawCanonicalId":null},"summary":{"shortDescription":"Burr-Brown OPA241UA general-purpose op-amp, single channel, 35 kHz gain-bandwidth, 0.01 V/µs slew rate, rail-to-rail output, 8-SOIC package, tube.","salesMarkdown":"## 35 kHz GBP, 0.01 V/µs slew — a micropower precision amplifier for DC and low-frequency signals The OPA241UA is a single-channel general-purpose op-amp from Burr-Brown, built for applications where supply current is tight and signal bandwidth stays below a few hundred hertz. Its 35 kHz gain-bandwidth product and 0.01 V/µs slew rate mean it is not a candidate for audio, fast control loops, or any path carrying kilohertz-range AC content — the output simply cannot slew fast enough to track a 1 kHz sine wave without distortion. What it does well is condition DC or quasi-DC signals: thermocouple outputs, strain-gauge bridges, battery-voltage monitoring, or current-sense amplifier stages where the signal changes slowly. Supply current is 27 µA typical, which places it in the micropower class — a sensor node that runs continuously on a coin cell sees the op-amp's draw as a small fraction of the total budget. Input offset voltage is 100 µV max, respectable for a general-purpose part at this power level, and the rail-to-rail output stage swings within millivolts of either supply rail, preserving dynamic range in low-voltage single-supply designs. ## Package, supply range, and temperature grade Housed in an 8-SOIC package (0.154-inch body width, 3.90 mm), the OPA241UA uses a standard footprint shared by hundreds of op-amps — no board spin needed to swap in a different single-channel device. The supply span runs from 2.7 V to 36 V, so it works on a single lithium cell, a 5 V logic rail, or a ±15 V split supply without external regulation. Operating temperature covers -40 °C to 85 °C, the industrial band that handles most factory-floor, outdoor enclosure, and automotive-cabin environments. Output drive is rated 21 mA per channel — enough to swing a 600 Ω load rail-to-rail or drive the input of a successive-approximation ADC's sample-and-hold capacitor. Input bias current is 4 nA typical, low enough that a 10 kΩ source resistor contributes only 40 µV of offset error, negligible against the 100 µV input offset. ## Active production, ROHS3, and sourcing posture The OPA241UA carries an active lifecycle status — no end-of-life notice, no last-time-buy clock. It is ROHS3 compliant, meaning no exempted substances and full EU market access.","metaTitle":"OPA241UA op-amp, 35 kHz GBP, 0.01 V/µs slew, rail-to-rail","metaDescription":"OPA241UA general-purpose op-amp in 8-SOIC. 35 kHz GBP, 0.01 V/µs slew, rail-to-rail output, 27 µA supply. Active, ROHS3. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"0.01V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"27µA","Number of Circuits":"1","Current - Input Bias":"4 nA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"35 kHz","Voltage - Input Offset":"100 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"21 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.26","priceTiers":[{"qty":1,"price":"$4.26000","currency":"USD"},{"qty":10,"price":"$3.83000","currency":"USD"},{"qty":25,"price":"$3.62040","currency":"USD"},{"qty":100,"price":"$3.13770","currency":"USD"},{"qty":250,"price":"$2.97680","currency":"USD"},{"qty":500,"price":"$2.67108","currency":"USD"},{"qty":1000,"price":"$2.27700","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/153b5ddb476fd946993bcb21c9ded52a.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OPA241UA/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation is available for OPA241UA?","answer":"The OPA241UA is ROHS3 compliant (no exempted substances). No UL or IEC certification is listed in the available documentation for this part."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/OPA241UA","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/OPA241UA when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}