{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OPA2301AIDGKT","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"OPA2301AIDGKT","canonicalUrl":"https://icboms.com/texas-instruments/OPA2301AIDGKT","factsUrl":"https://icboms.com/api/mcp/products/OPA2301AIDGKT","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments OPA2301AIDGKT dual CMOS operational amplifier, 150 MHz gain-bandwidth, 80 V/µs slew rate, 0.1 pA input bias, 8-VSSOP package.","salesMarkdown":"## 150 MHz GBW and 80 V/µs slew rate — signal-chain bandwidth anchor The OPA2301AIDGKT: The 150 MHz gain-bandwidth product sets the closed-loop bandwidth ceiling for a given noise gain — at a gain of 10, the -3 dB point lands at 15 MHz, which covers video, high-speed ADC drivers, and wideband instrumentation front-ends. 0.1 pA typical input bias current eliminates the need for a guard ring or bootstrapping on a high-impedance sensor front-end — a 10 MΩ source resistor drops only 1 µV of offset from bias current, negligible in a 1 mV offset amplifier. ## Dual-channel CMOS with 9.5 mA per channel supply Two independent CMOS amplifiers in a single 8-VSSOP package, each drawing 9.5 mA quiescent current — total 19 mA for the dual, which fits a 5 V rail budget of 95 mW quiescent dissipation. 70 mA output current per channel drives the input of a 12-bit, 10 MSPS SAR ADC directly, or a 50 Ω back-terminated cable with 3.5 V swing — the output stage is not limited to high-impedance loads. The 2.7 V minimum allows the amplifier to run from a lithium-ion cell near end-of-discharge. The operating temperature range covers the full industrial envelope and the under-hood automotive ambient — an engine control unit (ECU) or transmission controller that sees 105°C on the PCB still has 20°C margin before the top of the range. 1 mV maximum input offset voltage over temperature means the DC accuracy is consistent across the range — a thermocouple amplifier with a gain of 100 sees only 100 mV of output-referred offset drift, manageable with a software calibration routine. ## 8-VSSOP — footprint and layout notes The 8-VSSOP package (3.00 mm × 3.00 mm body, 0.65 mm pitch) fits on a two-layer board with a 0.20 mm trace width — the centre pad is not a thermal pad, so no via array under the package is needed; place a 0.1 µF decoupling capacitor within 2 mm of each supply pin. Cut Tape works for prototype builds and rework. ## Active lifecycle and compliance ROHS3 compliant — no exemption-flagged substances; the package is lead-free and compatible with lead-free reflow profiles (260°C peak).","metaTitle":"OPA2301AIDGKT CMOS op-amp, 150 MHz GBW, 80 V/µs","metaDescription":"Texas Instruments OPA2301AIDGKT dual CMOS op-amp: 150 MHz GBW, 80 V/µs slew rate, 0.1 pA input bias. Active production, ROHS3 compliant. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"80V/µs","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"8-TSSOP, 8-MSOP (0.118\\\", 3.00mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"9.5mA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"0.1 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"150 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-VSSOP","Current - Output / Channel":"70 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.71","priceTiers":[{"qty":1,"price":"$3.71000","currency":"USD"},{"qty":10,"price":"$3.33500","currency":"USD"},{"qty":25,"price":"$3.15280","currency":"USD"},{"qty":100,"price":"$2.73260","currency":"USD"},{"qty":250,"price":"$2.59244","currency":"USD"},{"qty":500,"price":"$2.32620","currency":"USD"},{"qty":1250,"price":"$1.98300","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/20259040dc4ffb7d6936a4d0ae16b0c2.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OPA2301AIDGKT/alternatives.json"},"ai":{"faq":[{"question":"What is the OPA2301AIDGKT's gain-bandwidth product and slew rate?","answer":"The OPA2301AIDGKT has a 150 MHz gain-bandwidth product and an 80 V/µs slew rate. The GBW sets the closed-loop bandwidth for a given gain; the slew rate determines the maximum large-signal rise time into the load capacitance."},{"question":"What package does the OPA2301AIDGKT come in?","answer":"The OPA2301AIDGKT is supplied in an 8-VSSOP package (3.00 mm × 3.00 mm body, 0.65 mm pitch)."},{"question":"What is the input bias current of the OPA2301AIDGKT?","answer":"The typical input bias current is 0.1 pA. This low bias eliminates the need for guard rings or bootstrapping in high-impedance sensor front-ends."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/OPA2301AIDGKT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/OPA2301AIDGKT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}