{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OPA211IDRGT","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"OPA211IDRGT","canonicalUrl":"https://icboms.com/texas-instruments/OPA211IDRGT","factsUrl":"https://icboms.com/api/mcp/products/OPA211IDRGT","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments OPA211 series general-purpose op-amp, OPA211IDRGT, single circuit, 80 MHz gain-bandwidth, 27 V/µs slew rate, rail-to-rail output, 8-WFDFN exposed pad (8-SON 3x3 mm), surface mount, tape and reel.","salesMarkdown":"## Package and board integration The OPA211IDRGT comes in an 8-WFDFN exposed-pad package (8-SON, 3x3 mm) — the thermal pad underneath must be soldered to a PCB copper plane to keep the junction temperature within the -40°C to 125°C operating range. The pad also provides a low-inductance ground return for the high-frequency signal path. Supply span runs from 4.5 V to 36 V, so the same part works in a 5 V single-supply ADC driver or a ±15 V industrial sensor amplifier without a separate regulator. ## Speed and DC accuracy for signal-chain design 80 MHz gain-bandwidth product and 27 V/µs slew rate mean this op-amp can settle a 10 V step to 0.01% in under 1 µs — fast enough to drive a 16-bit SAR ADC without adding a separate buffer stage. Input offset voltage is trimmed to 30 µV typical, and input bias current is 60 nA — the offset dominates the DC error in a high-impedance sensor front-end, so the 30 µV figure is the one to budget for the system accuracy. Rail-to-rail output swings within 50 mV of each supply rail at light loads, preserving dynamic range when the supply is as low as 4.5 V. ## Sourcing and compliance ROHS3 compliant per — no restricted substances above the threshold, which clears EU and global BOM requirements without a waiver.","metaTitle":"TI OPA211IDRGT Op-Amp, 80 MHz, 27 V/µs, 8-SON","metaDescription":"Texas Instruments OPA211IDRGT general-purpose op-amp: 80 MHz GBW, 27 V/µs slew rate, 30 µV offset, rail-to-rail output, 8-SON (3x3 mm) package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"27V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-WFDFN Exposed Pad","lifecycle_stage":"eol_hot","Current - Supply":"3.6mA","Number of Circuits":"1","Current - Input Bias":"60 nA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"80 MHz","Voltage - Input Offset":"30 µV","Supplier Device Package":"8-SON (3x3)","Current - Output / Channel":"30 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$12.58","priceTiers":[{"qty":1,"price":"$12.58000","currency":"USD"},{"qty":10,"price":"$11.56500","currency":"USD"},{"qty":25,"price":"$11.08560","currency":"USD"},{"qty":100,"price":"$9.76730","currency":"USD"},{"qty":250,"price":"$9.28788","currency":"USD"},{"qty":500,"price":"$8.68866","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7a1b19544c6994266fbd155c66d6aa47.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OPA211IDRGT/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy OPA211IDRGT and how is it quoted?","answer":"Submit an RFQ for a firm price and lead-time estimate."},{"question":"What is the closest functional second-source for OPA211IDRGT?","answer":"The TLV9362IDDFR is a dual-channel op-amp with similar speed (10.6 MHz GBW, 25 V/µs slew rate) but lower input bias current (10 pA) and a different package. It is not a pin-for-pin drop-in — the OPA211IDRGT is a single-channel part in an 8-SON package, while the TLV9362IDDFR is a dual-channel in a different footprint. A board layout change would be required."},{"question":"What compliance documentation does Texas Instruments provide for OPA211IDRGT?","answer":"The part is ROHS3 compliant per the manufacturer's declaration. Standard TI documentation includes the datasheet, RoHS certificate of compliance, and material declaration upon request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/OPA211IDRGT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/OPA211IDRGT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}