{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OP747ARZ","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"OP747ARZ","canonicalUrl":"https://icboms.com/analog-devices/OP747ARZ","factsUrl":"https://icboms.com/api/mcp/products/OP747ARZ","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices OP747ARZ general-purpose quad op-amp, 700 kHz gain bandwidth, 0.2V/µs slew rate, rail-to-rail output, 14-SOIC package, tube.","salesMarkdown":"## Quad op-amp, 700 kHz GBW, 2.7–30 V supply The OP747ARZ is a quad general-purpose operational amplifier from Analog Devices in a 14-SOIC surface-mount package. It operates from a single supply spanning 2.7 V to 30 V, making it suitable for 3.3 V logic rails or single-cell Li-ion battery applications without a separate negative rail. With a gain-bandwidth product of 700 kHz and a slew rate of 0.2 V/µs, this amplifier is designed for moderate-speed signal conditioning — think sensor buffering, active filters below 100 kHz, or general-purpose analog processing where speed is not the priority. ## Rail-to-rail output and 30 µV offset The rail-to-rail output stage swings within millivolts of both supply rails, maximizing dynamic range at low supply voltages. Input offset voltage is 30 µV typical, giving decent DC precision for a general-purpose part — adequate for most non-instrumentation tasks. Each of the four channels can source or sink 30 mA, enough to drive a modest load or feed into an ADC input. Supply current is 320 µA per device (all four channels), so the total quiescent draw stays under 1 mA — a good fit for battery-powered or multi-channel boards where power budget is tight. Input bias current is 5 nA, which is fine for signal sources with impedance up to a few hundred kOhm. For higher-impedance sensors (piezo, photodiode) the bias current will introduce a DC error that may need trimming or a FET-input alternative. ## Industrial temperature, active lifecycle Rated for -40°C to +85°C operating temperature, the OP747ARZ covers the industrial temperature grade — suitable for factory-floor control, outdoor telecom cabinets, and HVAC systems, but not automotive under-hood environments. RoHS3 compliance is confirmed, so it ships without lead or other restricted substances under the current EU directive. ## Sourcing and fit for the BOM The OP747ARZ is an active, in-production part from Analog Devices. The 14-SOIC package (0.154\" body width, 3.90 mm) is a standard footprint shared with many quad op-amps. The tube packaging means it ships in anti-static tubes, not tape-and-reel — check your pick-and-place feeder compatibility if ordering for automated assembly.","metaTitle":"OP747ARZ Analog Devices Quad Op-Amp, 700 kHz, Rail-to-Rail","metaDescription":"OP747ARZ quad general-purpose op-amp, 700 kHz GBW, 0.2V/µs slew rate, rail-to-rail output, 14-SOIC. Active, RoHS3 compliant. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Tube","Slew Rate":"0.2V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"320µA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"5 nA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"700 kHz","Voltage - Input Offset":"30 µV","Supplier Device Package":"14-SOIC","Current - Output / Channel":"30 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"2.7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9.93","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$9.93000","currency":"USD"},{"qty":10,"price":"$8.96800","currency":"USD"},{"qty":25,"price":"$8.55120","currency":"USD"},{"qty":100,"price":"$7.42490","currency":"USD"},{"qty":250,"price":"$7.09120","currency":"USD"},{"qty":500,"price":"$6.46552","currency":"USD"},{"qty":1000,"price":"$5.63126","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/8b07c2e10495b3c9c7c23bce137cbf70.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the OP747ARZ's gain-bandwidth product and slew rate?","answer":"The OP747ARZ has a gain-bandwidth product of 700 kHz and a slew rate of 0.2 V/µs. This limits it to moderate-speed applications — active filters below 100 kHz or general-purpose signal conditioning where fast settling is not required."},{"question":"What supply voltage range does the OP747ARZ support?","answer":"The OP747ARZ operates from a single supply spanning 2.7 V to 30 V. It works on a 3.3 V logic rail or a single-cell Li-ion battery without needing a negative supply."},{"question":"How does the OP747ARZ compare to the AD623BRZ?","answer":"The AD623BRZ is a single-channel instrumentation amplifier with a different pinout and higher input bias current (17 nA). The OP747ARZ is a quad general-purpose op-amp — they are not drop-in replacements. The AD623 is for precision differential measurements; the OP747 is for general-purpose signal processing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/OP747ARZ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/OP747ARZ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}