{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OP42GPZ","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"OP42GPZ","canonicalUrl":"https://icboms.com/analog-devices/OP42GPZ","factsUrl":"https://icboms.com/api/mcp/products/OP42GPZ","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices OP42GPZ, JFET op-amp, 1 circuit, 8-DIP through-hole, 50V/µs slew rate, 10 MHz GBW, 16 V to 40 V supply, -40°C to 85°C.","salesMarkdown":"## What this JFET op-amp delivers The Analog Devices OP42GPZ is a single JFET-input operational amplifier in an 8-pin PDIP through-hole package. Its 50 V/µs slew rate and 10 MHz gain-bandwidth product make it a fit for fast-settling analog signal chains — DAC output buffers, waveform generators, and active filters where the signal edge matters. The JFET input stage keeps input bias current at 130 pA, which preserves accuracy in high-impedance sensor interfaces and photodiode amplifiers. ## Output drive and quiescent draw Each channel delivers 33 mA output current — enough to drive a load to ±10 V or feed a successive ADC input. Quiescent supply current is 5.1 mA, which is moderate for a fast JFET op-amp; not a low-power part for battery gear, but reasonable for a multi-channel board where the rail budget is a few tens of milliamps.","metaTitle":"OP42GPZ JFET Op-Amp, 50V/µs Slew Rate, 8-DIP","metaDescription":"ADI OP42GPZ JFET op-amp: 50V/µs slew rate, 10 MHz GBW, 5.1 mA supply, -40 to 85°C. Active, through-hole 8-DIP. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"50V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"5.1mA","Number of Circuits":"1","Current - Input Bias":"130 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"10 MHz","Voltage - Input Offset":"1.5 mV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"33 mA","Voltage - Supply Span (Max)":"40 V","Voltage - Supply Span (Min)":"16 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.29","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$11.29000","currency":"USD"},{"qty":10,"price":"$10.37200","currency":"USD"},{"qty":25,"price":"$9.94240","currency":"USD"},{"qty":100,"price":"$8.75990","currency":"USD"},{"qty":250,"price":"$8.33000","currency":"USD"},{"qty":500,"price":"$7.79260","currency":"USD"},{"qty":1000,"price":"$7.60500","currency":"USD"}]},"links":{"datasheetUrl":"https://www.analog.com/media/en/technical-documentation/data-sheets/OP42.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the recommended replacement for OP42GPZ?","answer":"No official replacement is listed because the part is still active. For a surface-mount alternative in the same family, look at the OP42 family's SOIC variants — same JFET core, same slew rate, different footprint."},{"question":"What is the difference between OP42GPZ and OP42?","answer":"OP42GPZ is the through-hole PDIP variant of the OP42 JFET op-amp. The 'GPZ' suffix indicates the 8-pin DIP package and ROHS3 compliance. The die and electrical specs (50 V/µs slew rate, 10 MHz GBW) are identical across the family."},{"question":"Is OP42GPZ single supply?","answer":"Yes — the OP42GPZ can run from a single supply rail between 16 V and 40 V. The input common-mode range and output swing are specified for single-supply operation within that span."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/OP42GPZ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/OP42GPZ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}