{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OP400HPZ","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"OP400HPZ","canonicalUrl":"https://icboms.com/analog-devices/OP400HPZ","factsUrl":"https://icboms.com/api/mcp/products/OP400HPZ","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices OP400HPZ quad general-purpose op-amp, 14-DIP (0.300\", 7.62mm) through-hole package, 500 kHz gain bandwidth, 0.15 V/µs slew rate, 600 µA supply per channel, tube.","salesMarkdown":"## Quad low-power op-amp in 14-pin DIP The OP400HPZ is a quad-channel general-purpose operational amplifier from Analog Devices in a 14-lead PDIP package (0.300-inch width). It integrates four independent amplifiers in one through-hole package, saving board space compared to four separate single op-amps while keeping the layout on a standard DIP footprint. ## Parametric fit for signal-conditioning chains Each of the four channels draws 600 µA from the supply, so the total quiescent current for the package is 2.4 mA — low enough for multi-channel battery-powered or loop-powered transmitter designs where every milliamp counts. The 500 kHz gain-bandwidth product and 0.15 V/µs slew rate set the useful signal bandwidth. For a closed-loop gain of 10, the -3 dB bandwidth is about 50 kHz, and the full-power bandwidth into a 5 V peak-to-peak output swing is roughly 4.8 kHz. This suits slow sensor conditioning, active filters below 10 kHz, and DC amplification — not video or fast ADC drivers. These figures mean the OP400HPZ resolves microvolt-level signals without external nulling in most thermocouple, strain-gauge, and bridge amplifier circuits, provided the source impedance stays below a few hundred kilohms. The supply range spans 6 V to 36 V total (dual supplies from ±3 V to ±18 V). This wide compliance lets the same part run off a single 12 V or 24 V industrial rail or split supplies without a separate regulator. ## Industrial temperature and through-hole packaging The 14-pin DIP package (0.300-inch body width) is through-hole mounted, making it breadboard-friendly for prototyping and easy to hand-solder. It also simplifies rework and socketing in legacy designs where surface-mount conversion is not an option. Supplied in tubes, the parts are aligned and protected for manual or machine insertion without the handling issues of loose or tape-packaged through-hole devices. ## Production status and compliance Because it is an active, catalog-listed device, the OP400HPZ is sourced through authorized distribution channels.","metaTitle":"OP400HPZ Analog Devices Quad Op-Amp, 500 kHz, 14-DIP","metaDescription":"OP400HPZ quad general-purpose op-amp from Analog Devices. 500 kHz GBW, 0.15 V/µs slew rate, 600 µA supply. Active, RoHS3 compliant. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"0.15V/µs","Output Type":"Differential","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"14-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"600µA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"750 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"500 kHz","Voltage - Input Offset":"80 µV","Supplier Device Package":"14-PDIP","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"6 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$20.88","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$20.88000","currency":"USD"},{"qty":10,"price":"$19.19000","currency":"USD"},{"qty":25,"price":"$18.39400","currency":"USD"},{"qty":100,"price":"$16.20680","currency":"USD"},{"qty":250,"price":"$15.41136","currency":"USD"},{"qty":500,"price":"$14.41706","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"How can I order the OP400HPZ or request a quote?","answer":"The OP400HPZ is an active Analog Devices part, sourced to order against your BOM quantity through independent distribution."},{"question":"What is the OP400HPZ's gain bandwidth and slew rate?","answer":"This makes it suitable for DC-precise and low-frequency signal conditioning up to about 50 kHz at moderate gains."},{"question":"What package does the OP400HPZ come in?","answer":"The OP400HPZ is supplied in a 14-lead PDIP (0.300-inch, 7.62 mm body) through-hole package, shipped in tubes."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/OP400HPZ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/OP400HPZ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}