{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OP275GSZ-REEL","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"OP275GSZ-REEL","canonicalUrl":"https://icboms.com/analog-devices/OP275GSZ-REEL","factsUrl":"https://icboms.com/api/mcp/products/OP275GSZ-REEL","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices OP275GSZ-REEL, dual audio operational amplifier, 22V/µs slew rate, 9 MHz gain-bandwidth product, 4mA supply current, 8-SOIC package, -40°C to 85°C operating temperature.","salesMarkdown":"## Audio op-amp with a 22 V/µs edge It is designed for audio signal chains where slew rate matters—22 V/µs means it can track a full-amplitude 20 kHz sine wave without slewing into distortion, a common failure in slower general-purpose op-amps. The 9 MHz gain-bandwidth product gives enough loop gain to keep distortion low across the audio band, even with closed-loop gains of 10 or more. Supply current is 4 mA per amplifier, which is moderate for a dual audio op-amp—not the lowest quiescent, but a reasonable trade-off for the slew rate and noise performance typical of this family. The 22 V/µs slew rate is the headline number that sets this part apart from generic dual op-amps like the LM833 or NE5532. In practice, it means the output can swing 10 V peak-to-peak in about 450 ns—enough to reproduce fast transients in guitar pedals, mixing console inserts, or ADC driver stages without rounding off the leading edge. The 1 mV input offset voltage is typical for a bipolar-input audio op-amp; if your design needs sub-millivolt DC accuracy, you would look at a precision part instead. Input bias current is 100 nA, which is fine for low-impedance audio sources but will cause offset drift if the source impedance is high (above 10 kΩ). The 90 mA output current per channel can drive headphones or line-level loads directly, though a dedicated headphone amplifier chip would handle lower impedances better. The OP275GSZ-REEL operates from a split supply of ±4.5 V to ±22 V, or a single supply from 9 V to 44 V. That covers standard ±15 V audio rails and also single-supply designs like 12 V or 24 V industrial audio. ## Package and sourcing note The 8-SOIC footprint is a common, widely available package.","metaTitle":"OP275GSZ-REEL Audio Dual Op-Amp, 22V/µs Slew Rate, 8-SOIC","metaDescription":"Analog Devices OP275GSZ-REEL dual audio op-amp: 22V/µs slew rate, 9 MHz GBW, 4mA supply, -40°C to 85°C, 8-SOIC. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"22V/µs","Mounting Type":"Surface Mount","Amplifier Type":"Audio","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"4mA","Number of Circuits":"2","Current - Input Bias":"100 nA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"9 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"90 mA","Voltage - Supply Span (Max)":"44 V","Voltage - Supply Span (Min)":"9 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.96","priceTiers":[{"qty":1,"price":"$3.96000","currency":"USD"},{"qty":10,"price":"$3.55700","currency":"USD"},{"qty":25,"price":"$3.36280","currency":"USD"},{"qty":100,"price":"$2.91450","currency":"USD"},{"qty":250,"price":"$2.76500","currency":"USD"},{"qty":500,"price":"$2.48104","currency":"USD"},{"qty":1000,"price":"$2.11500","currency":"USD"},{"qty":2500,"price":"$2.11500","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OP275GSZ-REEL/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between OP275GSZ and OP275GSZ-REEL?","answer":"The die and performance are identical. The -REEL suffix indicates Tape & Reel packaging for automated assembly, while the base OP275GSZ typically ships in tubes or cut tape. The electrical specifications—22 V/µs slew rate, 9 MHz GBW, 4 mA supply—are the same across both suffixes."},{"question":"Can I use OP275GSZ-REEL as a replacement for LM833?","answer":"Yes, the OP275GSZ-REEL is a pin-compatible dual audio op-amp in the same 8-SOIC footprint and can replace an LM833 in most audio circuits. The OP275 offers a higher slew rate (22 V/µs vs. 7 V/µs typical for LM833) and lower input bias current (100 nA vs. 500 nA typical). Verify the supply voltage range: the OP275 operates from 9 V to 44 V total, which covers the standard ±15 V rails used with LM833."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/OP275GSZ-REEL","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/OP275GSZ-REEL when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}