{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OP15GP","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"OP15GP","canonicalUrl":"https://icboms.com/analog-devices/OP15GP","factsUrl":"https://icboms.com/api/mcp/products/OP15GP","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices OP15GP, JFET-input operational amplifier, single circuit, 5.4 MHz gain bandwidth, 9 V/µs slew rate, 60 pA input bias, 500 µV offset, 2.8 mA supply, 36 V supply range, -40 to 85°C, 8-DIP (0.300\") through-hole package.","salesMarkdown":"## JFET op-amp for ±15 V industrial signal chains It delivers 5.4 MHz gain-bandwidth product and 9 V/µs slew rate, with a typical input bias current of 60 pA and maximum input offset voltage of 500 µV. The 60 pA input bias current is low enough for high-impedance sensor interfaces (photodiodes, pH probes) where a bipolar op-amp's µA-level bias would create offset errors. The 500 µV input offset is adequate for general-purpose 12-bit signal chains but not precision DC measurement; if you need sub-100 µV offset, look at the AD8510 family instead. Supply range of 36 V (max) allows operation on standard ±15 V industrial rails with 6 V of headroom — useful for motor-drive feedback or PLC analog I/O modules where the supply is already regulated. Quiescent current of 2.8 mA is moderate; in a multi-channel board with ten of these, the total supply draw hits 28 mA, which a typical 78xx regulator handles without issue. The part is RoHS non-compliant, using a tin-lead (SnPb) finish. If your assembly line is RoHS-only and exempted for leaded solder under a military or medical exemption, this part fits; otherwise you will need a Pb-free alternate such as the AD8627AKSZ-REEL7 (surface-mount, RoHS compliant) or a through-hole JFET op-amp from the OP15 family that is listed as RoHS compliant. ## Package and form factor Supplied in 8-pin DIP (0.300\" width, 7.62 mm pitch) — standard through-hole footprint for breadboard prototyping, socketed test boards, or retrofit into legacy PCB designs that cannot migrate to surface-mount.","metaTitle":"OP15GP JFET Op-Amp, 5.4 MHz, 9 V/µs, 8-DIP","metaDescription":"OP15GP JFET op-amp: 5.4 MHz gain bandwidth, 9 V/µs slew rate, 60 pA bias current, 36 V supply, -40 to 85°C, 8-DIP. Active, RoHS non-compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Bulk","Slew Rate":"9V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"2.8mA","Number of Circuits":"1","Current - Input Bias":"60 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"5.4 MHz","Voltage - Input Offset":"500 µV","Supplier Device Package":"8-PDIP","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"36 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.97","priceTiers":[{"qty":311,"price":"$0.97000","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OP15GP/alternatives.json"},"ai":{"faq":[{"question":"What are the alternatives or equivalents to the OP15GP?","answer":"The closest functional alternative in JFET op-amp class is the AD8510ARZ-REEL7 — it offers higher gain-bandwidth (8 MHz), faster slew rate (20 V/µs), and lower input bias (25 pA), but comes in surface-mount SOIC-8 only. For a through-hole dual JFET op-amp, the AD712KNZ provides two amplifiers per package at 4 MHz and 20 V/µs, though its temperature range is commercial (0°C to 70°C) rather than industrial."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/OP15GP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/OP15GP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}