{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OP15FZ","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"OP15FZ","canonicalUrl":"https://icboms.com/analog-devices/OP15FZ","factsUrl":"https://icboms.com/api/mcp/products/OP15FZ","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices OP15FZ JFET operational amplifier, single circuit, 5.7 MHz gain bandwidth, 11V/µs slew rate, 8-CERDIP (0.300\", 7.62mm) through-hole package, bulk.","salesMarkdown":"## JFET front-end for precision analog signal chains The OP15FZ is a single-circuit JFET-input operational amplifier in a hermetic 8-CERDIP package — the ceramic body and glass seal make it a candidate for moisture-sensitive, high-reliability, or long-life instrumentation where plastic SOIC packages risk popcorn cracking or ionic contamination over decades of service. ## DC precision and input characteristics Input bias current is 30 pA typical — the JFET gate leakage is orders of magnitude lower than a bipolar-input op-amp, so the OP15FZ does not load high-impedance sources like pH probes, pyroelectric sensors, or high-value feedback resistors in precision integrators. Input offset voltage is 400 µV maximum at 25°C — this sets the DC accuracy floor. For a gain-of-100 stage the output offset error is 40 mV before any nulling; if the application requires sub-mV precision, plan for an external trim pot or select a lower-offset grade. Supply current is 2.7 mA typical — in a multi-channel data-acquisition board with eight OP15FZ devices the analog rail budget is roughly 22 mA, leaving headroom for the ADC reference and multiplexer. The supply span is 44 V total — this part runs comfortably on ±15 V rails (30 V total) or a single 36 V rail, with margin to the 44 V absolute maximum. ## Lifecycle and compliance reality Because the part is through-hole in a CERDIP package, it ships in bulk tubes — not tape-and-reel. Plan for hand-insertion or wave-solder assembly; no reel feeder or pick-and-place nozzle profile is needed.","metaTitle":"OP15FZ JFET Op-Amp, 5.7 MHz, 11V/µs, 8-CERDIP","metaDescription":"OP15FZ JFET op-amp, 5.7 MHz GBW, 11V/µs slew rate, 30 pA bias, 8-CERDIP hermetic. Active production, RoHS non-compliant. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Bulk","Slew Rate":"11V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-CDIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"2.7mA","Number of Circuits":"1","Current - Input Bias":"30 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"5.7 MHz","Voltage - Input Offset":"400 µV","Supplier Device Package":"8-CERDIP","Voltage - Supply Span (Max)":"44 V","Voltage - Supply Span (Min)":"44 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.14","stockQuantity":23,"priceTiers":[{"qty":73,"price":"$4.14000","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/OP15FZ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/OP15FZ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}