{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OP05EP","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"OP05EP","canonicalUrl":"https://icboms.com/analog-devices/OP05EP","factsUrl":"https://icboms.com/api/mcp/products/OP05EP","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices OP05EP instrumentation amplifier, 1 circuit, 600 kHz bandwidth, 0.3 V/µs slew rate, 250 µV input offset, 8-DIP (0.300\", 7.62 mm) through-hole package, bulk.","salesMarkdown":"## 600 kHz instrumentation amp in a socket-friendly DIP The OP05EP is a single-channel instrumentation amplifier from Analog Devices, built for precision signal conditioning in the 0°C to 70°C commercial temperature range. Its 600 kHz bandwidth and 0.3 V/µs slew rate suit it for low-to-moderate frequency sensor front-ends — think strain-gauge bridges, thermocouple amplifiers, or medical transducer inputs where the signal of interest sits below a few hundred kilohertz. Input bias current is 1.2 nA typical and input offset voltage is 250 µV — both moderate figures for an instrumentation amp of this era, meaning the part can resolve millivolt-level signals without excessive drift, provided the source impedance is kept under a few hundred kilohms. ## Supply rail flexibility and package fit The OP05EP operates from a single supply as low as 6 V up to 36 V maximum, or from split rails (e.g., ±3 V to ±18 V). This wide supply span lets it drop into existing ±15 V analog front-end designs without a regulator change, or run from a single 12 V or 24 V industrial rail. Housed in an 8-pin DIP (0.300\" width, 7.62 mm body), the OP05EP is through-hole mounted and socket-compatible. No lab bench or hot-air station needed — swap it on site with a standard DIP extractor. The wide pin spacing and large package also make hand-prototyping and rework straightforward. Packaged in bulk (loose tubes), not tape-and-reel. For a repair bench or low-volume build, bulk is actually easier — no reel fees, no minimum reel quantity to deal with. ## Lifecycle and compliance — active but not RoHS The OP05EP carries an active product status from Analog Devices — no end-of-life notice, no last-time-buy window to track. It remains a valid BOM line for both new designs and field replacements. Important compliance note: this part is RoHS non-compliant. The leads use a tin-lead solder finish, which is exempt for certain high-reliability or military applications but will not pass a RoHS-10 substance test. If your assembly line is RoHS-only, you will need a waiver or a leaded-solder process step.","metaTitle":"Analog Devices OP05EP Instrumentation Amp, 600 kHz, 8-DIP","metaDescription":"Analog Devices OP05EP instrumentation amplifier, 1 circuit, 600 kHz bandwidth, 0.3 V/µs slew rate. Through-hole 8-DIP package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Bulk","Slew Rate":"0.3V/µs","Mounting Type":"Through Hole","-3db Bandwidth":"600 kHz","Amplifier Type":"Instrumentation","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Number of Circuits":"1","Current - Input Bias":"1.2 nA","Operating Temperature":"0°C ~ 70°C","Voltage - Input Offset":"250 µV","Supplier Device Package":"8-PDIP","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"6 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.67","stockQuantity":24,"priceTiers":[{"qty":65,"price":"$4.67000","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"Will OP05EP drop into a board that was designed for AD623ARMZ-REEL7 without rewiring?","answer":"No. The AD623ARMZ-REEL7 is a surface-mount MSOP-8 package with a rail-to-rail output and a lower supply voltage range (2.7 V to 12 V). The OP05EP is a through-hole DIP-8 with a wider supply range (6 V to 36 V) and no rail-to-rail output. The pin functions are similar but the package footprint and supply requirements are different — a board spin or adapter socket is needed."},{"question":"What is the closest through-hole peer to OP05EP from the same family?","answer":"The AD625KNZ is a through-hole DIP instrumentation amplifier with a 25 MHz bandwidth, 5 V/µs slew rate, and 25 µV input offset — significantly faster and more precise than the OP05EP. It also operates from ±12 V supplies and is specified for the same 0°C to 70°C temperature range. If your design needs higher bandwidth and lower offset, the AD625KNZ is a drop-in DIP-8 alternative, though the pinout should be verified against the OP05EP."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/OP05EP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/OP05EP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}