{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OP05BICJ","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"OP05BICJ","canonicalUrl":"https://icboms.com/analog-devices/OP05BICJ","factsUrl":"https://icboms.com/api/mcp/products/OP05BICJ","rawCanonicalId":null},"summary":{"shortDescription":"Precision instrumentation amplifier, single circuit, TO-99-8 metal can, 0.3 V/µs slew rate, 200 µV input offset, 1 nA input bias, -55°C to 125°C operating range, 6 V to 36 V supply span, through-hole mounting, active lifecycle.","salesMarkdown":"## Precision instrumentation amplifier in a hermetic TO-99 can The OP05BICJ is a single-circuit instrumentation amplifier from the OP05 series, packaged in a TO-99-8 metal can for through-hole mounting. It is designed for precision analog signal conditioning where low offset and bias current are required over a wide temperature range. Key characteristics include a 0.3 V/µs slew rate, 200 µV input offset voltage, and 1 nA input bias current, operating from a 6 V to 36 V supply span. The 0.3 V/µs slew rate limits the large-signal bandwidth to approximately 4.8 kHz at 10 V output swing. This is adequate for strain-gauge bridges, thermocouple amplifiers, and other low-frequency sensor interfaces where noise rejection and DC accuracy matter more than speed. For applications requiring faster settling, a higher-slew-rate instrumentation amplifier such as the AD623 (0.3 V/µs in surface-mount) would be a functional alternative, though the OP05BICJ's TO-99 package and military temperature range are not matched by that part. ## 200 µV input offset and 1 nA bias — DC accuracy for bridge and thermocouple circuits The 200 µV maximum input offset voltage sets the error floor before external gain. With a gain of 100, this offset appears as 20 mV at the output, which must be nulled or calibrated out in precision measurement chains. The 1 nA input bias current is low enough for high-impedance sources such as pH probes or piezoelectric sensors, but not as low as CMOS-input instrumentation amplifiers (typically picoamps). For source impedances above 100 kΩ, the bias current multiplied by source resistance adds a voltage error that should be budgeted. ## TO-99-8 metal can — hermetic package for high-reliability programs The TO-99-8 metal can provides a hermetic seal against moisture and contaminants, making it suitable for military, aerospace, and downhole applications where plastic packages are not accepted. The through-hole mounting requires a drilled PCB and manual or wave-solder assembly; no surface-mount reflow profile applies. The metal case also offers improved thermal dissipation compared to plastic DIP packages, though the junction-to-ambient thermal resistance is still dominated by the leads. ## Active lifecycle, RoHS non-compliant — sourcing for long-life programs This simplifies procurement for multi-year programs that require a stable, qualified part. However, the device is RoHS non-compliant due to lead (Pb) in the solder terminations. For EU-regulated assemblies, an exemption (e.g., RoHS Annex III, category 8 or 9 for industrial monitoring and control) must be documented.","metaTitle":"OP05BICJ Instrumentation Amplifier, TO-99, -55°C to 125°C","metaDescription":"OP05BICJ instrumentation amplifier in TO-99-8 metal can. 0.3 V/µs slew rate, 200 µV input offset, 1 nA bias current. Military temp range -55°C to 125°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Bulk","Slew Rate":"0.3V/µs","Mounting Type":"Through Hole","Amplifier Type":"Instrumentation","Package / Case":"TO-99-8 Metal Can","lifecycle_stage":"eol_hot","Number of Circuits":"1","Current - Input Bias":"1 nA","Operating Temperature":"-55°C ~ 125°C","Voltage - Input Offset":"200 µV","Supplier Device Package":"TO-99","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"6 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.87","priceTiers":[{"qty":78,"price":"$3.87000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/e20bd1f6a7d7d3feaee382f5e668c432.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/OP05BICJ/alternatives.json"},"ai":{"faq":[{"question":"What is the OP05BICJ slew rate and input offset voltage?","answer":"The slew rate is 0.3 V/µs, and the maximum input offset voltage is 200 µV. These specs define the bandwidth and DC accuracy for precision instrumentation applications."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/OP05BICJ","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/OP05BICJ when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}