{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MX7575JN","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MX7575JN","canonicalUrl":"https://icboms.com/analog-devices/MX7575JN","factsUrl":"https://icboms.com/api/mcp/products/MX7575JN","rawCanonicalId":null},"summary":{"shortDescription":"Maxim Integrated MX7575JN, 8-bit SAR ADC, 200k samples per second, single-ended input, parallel data interface, 18-DIP (0.300\", 7.62mm) through-hole package, Bulk.","salesMarkdown":"## 8-bit SAR ADC in a through-hole DIP The MX7575JN is an 8-bit successive-approximation (SAR) ADC from Maxim Integrated, sampling at 200k samples per second with a single-ended input and parallel data interface. The 18-pin DIP package (0.300\" width) is through-hole, which means it reworks easily under a soldering iron — no hot-air profile required, and pin 1 is clearly marked by the notch and dot on the body. ## Sampling rate and interface fit At 200k samples per second, this ADC is suited for low-to-moderate-speed data acquisition — think sensor readout, DC voltage monitoring, or audio-frequency digitization, not high-speed RF or video. The parallel data interface (8-bit wide bus) means the host microcontroller or FPGA reads the conversion result in one cycle — no SPI clocking overhead, but it uses more I/O pins than a serial ADC. The S/H-ADC configuration with a 1:1 ratio means the sample-and-hold captures the input voltage on the same clock edge as the conversion start — standard for SAR ADCs, but the acquisition time must be respected when driving the input from a high-impedance source. ## Supply rails and temperature range Both analog and digital supplies share the same 4.75V–5.25V range — a single 5V rail handles everything, but the analog supply must be clean (low ripple) to avoid noise coupling into the conversion. It is RoHS non-compliant (leaded solder), so verify your exemption or accept the leaded finish for legacy BOMs that require tin-lead compatibility.","metaTitle":"MX7575JN 8-bit SAR ADC, 200k SPS, Parallel, 18-DIP","metaDescription":"MX7575JN 8-bit SAR ADC, 200k samples/sec, single-ended input, parallel interface, 18-DIP package. Active production, RoHS non-compliant. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Bulk","Input Type":"Single Ended","Architecture":"SAR","Configuration":"S/H-ADC","Mounting Type":"Through Hole","Data Interface":"Parallel","Number of Bits":"8","Package / Case":"18-DIP (0.300\\\", 7.62mm)","Reference Type":"External","Ratio - S/H:ADC":"1:1","lifecycle_stage":"eol_hot","Number of Inputs":"1","Operating Temperature":"0°C ~ 70°C","Supplier Device Package":"18-PDIP","Number of A/D Converters":"1","Voltage - Supply, Analog":"4.75V ~ 5.25V","Voltage - Supply, Digital":"4.75V ~ 5.25V","Sampling Rate (Per Second)":"200k"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10.5","stockQuantity":0,"priceTiers":[{"qty":29,"price":"$10.50000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a232d53e998ec1b3657d5e241417bc49.pdf","sourceUrl":null},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MX7575JN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MX7575JN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}