{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MIC2507BM TR","brand":"Microchip Technology","brandSlug":"microchip","productSlug":"MIC2507BM-TR","canonicalUrl":"https://icboms.com/microchip/MIC2507BM-TR","factsUrl":"https://icboms.com/api/mcp/products/MIC2507BM%20TR","rawCanonicalId":null},"summary":{"shortDescription":"Microchip Technology MIC2507BM TR high-side power distribution switch, 4-output, 1A per channel, 120 mOhm Rds(on) typ, 2.7V-7.5V load, 14-SOIC package, slew-rate controlled, status flag.","salesMarkdown":"## Package and board-fit — 14-SOIC with 1A per channel The MIC2507BM TR: Each of the four outputs is rated for 1 A continuous, with a typical Rds(on) of 120 mOhm — at 1 A the conduction loss is 120 mW per channel, which sums to 480 mW for all four channels. The 14-SOIC copper pad on the board should be sized to keep the junction below the 85°C ambient ceiling. The switch operates over a load voltage range of 2.7 V to 7.5 V and does not require a separate Vcc/Vdd supply — the gate drive is derived from the load rail. The output configuration is high-side, so the switch sits between the supply and the load, with the N-channel FET pulling the output up when enabled. The input is non-inverting and the interface is a simple On/Off logic pin per channel. ## Protection and switching behaviour Fault protection includes adjustable current limiting and over-temperature shutdown — the current limit is set with an external resistor, so the trip threshold can be tailored to the load. The slew-rate controlled turn-on reduces inrush current into capacitive loads, and the status flag output signals over-current or thermal fault conditions to the host controller. These features make the part suitable for USB ports, hot-swap supplies, and general-purpose power distribution where a controlled ramp and fault reporting are needed. The switch type is general purpose, and the ratio of input to output is 1:1 — each input controls one output directly.","metaTitle":"MIC2507BM TR Microchip High-Side Switch, 1A, 14-SOIC","metaDescription":"MIC2507BM TR active high-side power switch, 4 channels, 1A per output, 120 mOhm Rds(on), 2.7-7.5V load, 14-SOIC. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"Not applicable","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Package":"Bulk","Features":"Slew Rate Controlled, Status Flag","Interface":"On/Off","Input Type":"Non-Inverting","Output Type":"N-Channel","Switch Type":"General Purpose","Rds On (Typ)":"120mOhm","Mounting Type":"Surface Mount","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","Voltage - Load":"2.7V ~ 7.5V","lifecycle_stage":"eol_hot","Fault Protection":"Current Limiting (Adjustable), Over Temperature","Number of Outputs":"4","Output Configuration":"High Side","Ratio - Input:Output":"1:1","Operating Temperature":"-40°C ~ 85°C (TA)","Current - Output (Max)":"1A","Supplier Device Package":"14-SOP","Voltage - Supply (Vcc/Vdd)":"Not Required"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.12","priceTiers":[{"qty":268,"price":"$1.12000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/22eacd0cea46bacf68cf704ceffda2ed.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/MIC2507BM%20TR/alternatives.json"},"ai":{"faq":[{"question":"What is the output current per channel of the MIC2507BM TR?","answer":"Each of the four outputs is rated for 1 A maximum continuous current. The typical Rds(on) is 120 mOhm, so at 1 A the conduction loss is 120 mW per channel. The current limit is adjustable via an external resistor."},{"question":"What package does the MIC2507BM TR come in?","answer":"It is a surface-mount package suitable for standard reflow assembly."},{"question":"What protection features does the MIC2507BM TR include?","answer":"The switch includes adjustable current limiting and over-temperature shutdown. It also features slew-rate controlled turn-on to limit inrush current, and a status flag output that indicates fault conditions."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/microchip/MIC2507BM-TR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/microchip/MIC2507BM-TR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}