{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MCP6V62-E/MS","brand":"Microchip Technology","brandSlug":"microchip","productSlug":"MCP6V62-E-MS","canonicalUrl":"https://icboms.com/microchip/MCP6V62-E-MS","factsUrl":"https://icboms.com/api/mcp/products/MCP6V62-E%2FMS","rawCanonicalId":null},"summary":{"shortDescription":"Microchip MCP6V62-E/MS, dual zero-drift operational amplifier, 1 MHz gain bandwidth, 0.45 V/µs slew rate, 8 µV input offset, 80 µA supply per two channels, rail-to-rail output, 8-MSOP package, -40°C to 125°C.","salesMarkdown":"## Dual zero-drift op-amp for precision DC measurement The zero-drift architecture continuously samples and nulls the offset, so you get microvolt-level accuracy without trimming or calibration cycles on the production line. ## 80 µA supply current — built for battery-powered instruments Each of the two amplifiers draws 80 µA total supply current, so the pair consumes about 160 µA quiescent. That is low enough to leave a CR2032 coin cell running for months in a portable data logger or a handheld field meter. The 1 MHz gain-bandwidth product and 0.45 V/µs slew rate are modest — this is not a high-speed video amp — but the bandwidth is adequate for low-frequency sensor conditioning, 1 kHz ADC sampling, or loop compensation in a slow control loop. ## Industrial temperature range and 8-MSOP package Surface-mount only; ships in tube. ## Input bias current: 1 pA — handles high-impedance sources With a typical input bias current of 1 pA, the MCP6V62 does not load high-impedance signal sources like pH probes, photodiode transimpedance stages, or high-value resistor dividers. The zero-drift topology also keeps the offset drift below a few tens of nV/°C, so the reading stays stable across the temperature range without a software correction table.","metaTitle":"Microchip MCP6V62-E/MS Zero-Drift Op-Amp, 1 MHz, 8-MSOP","metaDescription":"MCP6V62-E/MS dual zero-drift op-amp: 8 µV offset, 80 µA supply, rail-to-rail output, -40°C to 125°C. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"0.45V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"Zero-Drift","Package / Case":"8-TSSOP, 8-MSOP (0.118\\\", 3.00mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"80µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"8 µV","Supplier Device Package":"8-MSOP","Current - Output / Channel":"23 mA","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.2","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$2.20000","currency":"USD"},{"qty":25,"price":"$1.84440","currency":"USD"},{"qty":100,"price":"$1.69500","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/0a34f9f0a277ed917bf721f0acddb75c.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the difference between the MCP6V61 and MCP6V62?","answer":"The MCP6V61 is a single-channel (one op-amp) version; the MCP6V62 is the dual-channel (two op-amps) version in the same zero-drift family."},{"question":"Can the MCP6V62 be used as a comparator?","answer":"The MCP6V62 is not designed or specified for comparator use. Its output stage is optimized for linear operation, and the zero-drift auto-correction loop can cause instability when the amplifier is driven into saturation. For comparator applications, use a dedicated comparator such as the Microchip MCP6541 family."},{"question":"What is the closest functional second-source to the MCP6V62-E/MS?","answer":"The MCP6L72T-E/SN is a general-purpose dual op-amp with 2 MHz GBWP and 0.9 V/µs slew rate, but it lacks zero-drift architecture and has a typical input offset of 1 mV — two orders of magnitude higher than the MCP6V62's 8 µV. For a zero-drift alternative, the single-channel MCP6V91UT-E/OT offers 10 MHz GBWP and 9.5 V/µs slew rate but draws 1.1 mA supply current and comes in a single-channel SOT-23 package. Neither is a drop-in replacement; the MCP6V62-E/MS remains the only dual zero-drift option in 8-MSOP at this supply current level."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/microchip/MCP6V62-E-MS","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/microchip/MCP6V62-E-MS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}