{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MCP6281-E/P","brand":"Microchip Technology","brandSlug":"microchip","productSlug":"MCP6281-E-P","canonicalUrl":"https://icboms.com/microchip/MCP6281-E-P","factsUrl":"https://icboms.com/api/mcp/products/MCP6281-E%2FP","rawCanonicalId":null},"summary":{"shortDescription":"Microchip MCP6281-E/P, single general-purpose op-amp, 5 MHz gain bandwidth, 2.5 V/µs slew rate, rail-to-rail output, 450 µA supply, 2.2 V to 6 V supply, -40°C to 125°C, 8-DIP through-hole package.","salesMarkdown":"## Single general-purpose op-amp with 5 MHz GBWP and rail-to-rail output The MCP6281-E/P: The rail-to-rail output stage lets it swing close to the supply rails, which helps when driving an ADC input or a low-voltage load without losing headroom. ## Through-hole DIP package — field-swappable, breadboard-friendly Housed in an 8-pin DIP package (0.300\" width, 7.62 mm pitch), the MCP6281-E/P is a through-hole part that fits standard breadboards and prototyping sockets, and it's easy to swap in the field with basic tools — no hot-air station needed. The supplier device package is 8-PDIP, and it ships in tube form — not tape-and-reel, so plan for manual placement or a tube feeder on the pick-and-place if you're running a through-hole line. ## Temperature range and input characteristics for industrial use Input bias current is a mere 1 pA (typical), which means it won't load down high-impedance sources like photodiode or pH probe outputs — the offset voltage is specified at 3 mV maximum, so plan for a trim or accept the DC error in your gain stage.","metaTitle":"Microchip MCP6281-E/P General Purpose Op-Amp, 5 MHz","metaDescription":"MCP6281-E/P single general-purpose op-amp with 5 MHz GBWP, 2.5 V/µs slew rate, rail-to-rail output, 450 µA supply, -40 to 125°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Signal Isolation"],"specifications":{"Package":"Tube","Slew Rate":"2.5V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"450µA","Number of Circuits":"1","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"5 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"25 mA","Voltage - Supply Span (Max)":"6 V","Voltage - Supply Span (Min)":"2.2 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.85","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.85000","currency":"USD"},{"qty":25,"price":"$0.72000","currency":"USD"},{"qty":100,"price":"$0.65000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/0ee1ecacdd6b78a8e6ba2557dcbf5799.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can MCP6281-E/P replace MCP6001 in my circuit?","answer":"The MCP6281-E/P is a faster part (5 MHz GBWP, 2.5 V/µs slew rate) compared to the MCP6001 (1 MHz, 0.6 V/µs). It is pin-compatible in the same single DIP-8 footprint, but check your loop stability and bandwidth requirements — the higher speed may need compensation if your feedback network was tuned for the slower part."},{"question":"What is the equivalent of MCP6281-E/P?","answer":"The surface-mount sibling MCP6281T-E/SN is the same amplifier in an SOIC-8 package, electrically identical. For a dual-channel version in DIP, look at the MCP6272-E/P (2 MHz GBWP, 0.9 V/µs slew rate) — slower but with two amps in the same 8-pin footprint."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/microchip/MCP6281-E-P","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/microchip/MCP6281-E-P when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}