{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX9914EXK+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX9914EXK~3T","canonicalUrl":"https://icboms.com/analog-devices/MAX9914EXK~3T","factsUrl":"https://icboms.com/api/mcp/products/MAX9914EXK%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX9914EXK+T general-purpose op-amp, single circuit, 1 MHz gain bandwidth, 0.5 V/µs slew rate, rail-to-rail output, SC-70-5 package, tape and reel.","salesMarkdown":"## What this op-amp is for and where it fits The MAX9914EXK+T is a single-channel general-purpose operational amplifier in an SC-70-5 package, designed for signal conditioning in low-power, space-constrained analog front-ends. Its 1 MHz gain-bandwidth product and 0.5 V/µs slew rate suit sensor buffering, active filtering below 100 kHz, and DC-level shifting in battery-operated instruments. The 1.8 V to 5.5 V supply span lets it run from a single Li-ion cell, a 3.3 V rail, or a 5 V industrial supply without a separate regulator — a practical advantage for mixed-voltage boards where the op-amp shares the ADC's reference rail. ## Key parametric trade-offs for the BOM Drawing 20 µA quiescent supply current, this part fits into battery-powered designs where every microamp counts — a sensor node waking once per second to read a thermistor or photodiode can run for months on a CR2032 without the op-amp dominating the sleep budget. Input bias current is 1 pA typical, which means negligible voltage drop across high source impedances — a 10 MΩ sensor sees only 10 µV of offset from bias current, making this part usable for pH probes, pyroelectric detectors, and other high-impedance front-ends without a separate buffer. Rail-to-rail output swing preserves dynamic range at low supply voltages — at 1.8 V the output can swing within 20 mV of each rail, so a 0–1.8 V ADC input range is fully usable without gain-stage headroom loss. Input offset voltage is 200 µV typical, which is adequate for general-purpose signal chains but should be budgeted into the system error budget for precision DC measurements — a gain of 100 amplifies this to 20 mV at the output. ## Package and mounting reality The SC-70-5 (SOT-353) footprint is 2.0 mm × 2.1 mm — one of the smallest five-pin packages available. The 0.65 mm pin pitch routes cleanly on a two-layer board, but the narrow body means the decoupling capacitor must sit within 3 mm of the supply pin to keep the 20 µA supply clean; a 0.1 µF X7R in 0402 fits directly adjacent. Surface-mount assembly with standard reflow profile — no special bake requirements for moisture sensitivity, though the tape-and-reel quantity should be confirmed at RFQ for the target build volume. ## Lifecycle and compliance Operating temperature range -40°C to +85°C covers industrial environments — factory-floor sensor interfaces, outdoor telecom cabinets, and automotive cabin applications (non-engine-bay). ## Sourcing this part Available through authorized and independent distribution — quoted to order against the BOM quantity. Tape-and-reel packaging (Cut Tape also offered) suits both prototype hand-assembly and production pick-and-place. Pricing and lead time confirmed at RFQ.","metaTitle":"MAX9914EXK+T General Purpose Op-Amp, 1 MHz, SC-70-5","metaDescription":"MAX9914EXK+T general-purpose op-amp, 1 MHz GBW, rail-to-rail output, 20 µA supply, SC-70-5. Active production, ROHS3. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.5V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"5-TSSOP, SC-70-5, SOT-353","lifecycle_stage":"eol_hot","Current - Supply":"20µA","Number of Circuits":"1","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"200 µV","Supplier Device Package":"SC-70-5","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.48","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.48000","currency":"USD"},{"qty":10,"price":"$1.32500","currency":"USD"},{"qty":25,"price":"$1.25000","currency":"USD"},{"qty":100,"price":"$1.06500","currency":"USD"},{"qty":250,"price":"$1.00000","currency":"USD"},{"qty":500,"price":"$0.87500","currency":"USD"},{"qty":1000,"price":"$0.75000","currency":"USD"},{"qty":2500,"price":"$0.75000","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null},"ai":{"faq":[{"question":"Where can I buy MAX9914EXK+T and get a price?","answer":"The MAX9914EXK+T is sourced through authorized and independent distribution."},{"question":"What is the slew rate and gain bandwidth of MAX9914EXK+T?","answer":"The slew rate is 0.5 V/µs and the gain-bandwidth product is 1 MHz, making it suitable for signal frequencies up to roughly 100 kHz in a closed-loop gain of 10."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX9914EXK~3T","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX9914EXK~3T when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}