{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX9910EXK+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX9910EXKT","canonicalUrl":"https://icboms.com/analog-devices/MAX9910EXKT","factsUrl":"https://icboms.com/api/mcp/products/MAX9910EXK%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX9910EXK+T, General Purpose Op-Amp, 1 Circuit, Rail-to-Rail, 200 kHz GBW, 0.1 V/µs slew rate, 4 µA supply, SC-70-5 package, -40 to 85°C.","salesMarkdown":"The Analog Devices MAX9910EXK+T is a single-channel general-purpose operational amplifier in a SC-70-5 package. It delivers a 200 kHz gain-bandwidth product with a 0.1 V/µs slew rate, rail-to-rail output swing, and draws only 4 µA supply current. The 1.8 V to 5.5 V supply span and 1 pA input bias current make it a natural fit for battery-powered sensor interfaces, portable instrumentation, and low-frequency signal conditioning where every microamp counts. ## 200 kHz GBW at 4 µA — what that means for the BOM The 200 kHz gain-bandwidth product paired with a 4 µA supply current is the headline trade-off. This part is not for high-speed ADC drivers or video buffers; it is sized for DC-accurate amplification, active filtering below a few kilohertz, and low-side current sensing where the bandwidth requirement is modest. The 0.1 V/µs slew rate confirms the same — expect clean signal reproduction for audio-band or slower sensor outputs, not fast pulse edges. The rail-to-rail output keeps dynamic range in a 1.8 V single-supply system without a second rail. ## Package and pinout — SC-70-5 The MAX9910EXK+T comes in a 5-lead SC-70 package (also known as SOT-353). It is a surface-mount part, supplied on Tape & Reel or Cut Tape. The pinout follows the standard single op-amp layout: non-inverting input, inverting input, output, V+, and V-. Board footprint matches the SC-70-5 land pattern; no surprises if you are replacing a similar part in the same package. Store the reels dry — the moisture sensitivity level is not stated here, but SC-70 reels should be treated as MSL 1 unless the reel label says otherwise. ## Lifecycle and sourcing The MAX9910EXK+T is listed as Active and ROHS3 compliant. No end-of-life notice or last-time-buy window has been announced. For a BOM line that needs a low-power, single-supply op-amp in a tiny footprint, this part is a safe long-term choice — no urgency to stockpile or qualify a replacement. Sourced and quoted to order through independent distribution.","metaTitle":"MAX9910EXK+T General Purpose Op-Amp, 200 kHz, SC-70-5","metaDescription":"MAX9910EXK+T is an active general-purpose op-amp from Analog Devices. 200 kHz GBW, 0.1 V/µs slew rate, rail-to-rail output, 4 µA supply. SC-70-5 package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.1V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"5-TSSOP, SC-70-5, SOT-353","lifecycle_stage":"eol_hot","Current - Supply":"4µA","Number of Circuits":"1","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"200 kHz","Voltage - Input Offset":"200 µV","Supplier Device Package":"SC-70-5","Voltage - Supply Span (Max)":"5.5 V","Voltage - Supply Span (Min)":"1.8 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.56","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.56000","currency":"USD"},{"qty":10,"price":"$1.40400","currency":"USD"},{"qty":25,"price":"$1.32480","currency":"USD"},{"qty":100,"price":"$1.12890","currency":"USD"},{"qty":250,"price":"$1.06000","currency":"USD"},{"qty":500,"price":"$0.92750","currency":"USD"},{"qty":1000,"price":"$0.79500","currency":"USD"},{"qty":2500,"price":"$0.79500","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7ddd3fce41379a152a49ea232fabdd37.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can MAX9910EXK+T be used in low-power battery applications?","answer":"Yes. With a 4 µA supply current and operation down to 1.8 V, the MAX9910EXK+T is well suited for battery-powered sensor conditioning and portable instrumentation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX9910EXKT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX9910EXKT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}