{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX9760EUI","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX9760EUI","canonicalUrl":"https://icboms.com/analog-devices/MAX9760EUI","factsUrl":"https://icboms.com/api/mcp/products/MAX9760EUI","rawCanonicalId":null},"summary":{"shortDescription":"Maxim Integrated MAX9760EUI, Type Class AB, Output Type 2-Channel (Stereo) with Stereo Headphones, Max Output Power 3W x 2 @ 3Ohm, Voltage - Supply 4.5V ~ 5.5V, Operating Temperature -40°C ~ 85°C (TA), Package / Case 28-TSSOP (0.173\", 4.40mm Width) Exposed Pad, Supplier Device Package 28-TSSOP-EP, Mounting Type Surface Mount, Package Bulk.","salesMarkdown":"## Lifecycle and compliance The MAX9760EUI carries an Active lifecycle status with no end-of-life or last-time-buy notice on record. It is listed as RoHS non-compliant, so verify your assembly line's exemption allowance if you are shipping into RoHS-regulated markets. The operating temperature range of -40°C to 85°C covers industrial and outdoor audio equipment — no special screening needed for a heated enclosure or a cold-start environment. ## Sourcing and availability This part is sourced through independent distribution and quoted to order against an RFQ. Availability and current pricing are confirmed at quote time. Because the lifecycle is Active and no PCN/PDN has been issued, there is no imminent LTB risk for production planning.","metaTitle":"MAX9760EUI Class AB Stereo Audio Amp, 3W x 2 @ 3Ω, 28-TSSOP","metaDescription":"Maxim Integrated MAX9760EUI Class AB stereo audio power amplifier delivers 3W x 2 channels into 3Ω loads.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Type":"Class AB","Package":"Bulk","Output Type":"2-Channel (Stereo) with Stereo Headphones","Mounting Type":"Surface Mount","Package / Case":"28-TSSOP (0.173\\\", 4.40mm Width) Exposed Pad","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 5.5V","Operating Temperature":"-40°C ~ 85°C (TA)","Supplier Device Package":"28-TSSOP-EP","Max Output Power x Channels @ Load":"3W x 2 @ 3Ohm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.12","stockQuantity":0,"priceTiers":[{"qty":97,"price":"$3.12000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/7ed306ffbb4555edfccbe3e616a390cd.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the maximum output power of MAX9760EUI per channel?","answer":"It delivers 3W per channel into a 3Ω load. Output power into higher-impedance loads (4Ω, 8Ω) will be lower per the standard power-vs-impedance curve for Class AB amplifiers."},{"question":"Does MAX9760EUI require an external heatsink?","answer":"The 28-TSSOP exposed-pad package is designed to conduct heat to the PCB copper plane. For most applications driving 3W into 3Ω, a properly laid-out ground plane with sufficient copper area acts as the heatsink. A separate bolt-on heatsink is not required, but the pad must be soldered to the board."},{"question":"What is the pinout of MAX9760EUI?","answer":"The pinout is defined in the Maxim Integrated datasheet for the 28-TSSOP-EP package. The exposed pad is the thermal and electrical ground connection. Refer to the official datasheet for the full pin assignment."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX9760EUI","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX9760EUI when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}