{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX9077EKA/GH9-T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX9077EKA-GH9-T","canonicalUrl":"https://icboms.com/analog-devices/MAX9077EKA-GH9-T","factsUrl":"https://icboms.com/api/mcp/products/MAX9077EKA%2FGH9-T","rawCanonicalId":null},"summary":{"shortDescription":"Maxim MAX9077EKA/GH9-T, dual general-purpose comparator, 250ns typical propagation delay, push-pull/CMOS/TTL output, 2.1V to 5.5V supply, SOT-23-8 package, -40°C to 85°C.","salesMarkdown":"## 250 ns propagation delay — what it buys the signal chain The MAX9077EKA/GH9-T is a dual general-purpose comparator from Maxim, built for low-power threshold detection and level translation. Its 250 ns typical propagation delay is fast enough for most sensor interrupt, over-voltage latch, and zero-crossing circuits running below a few hundred kHz, without the power penalty of a high-speed comparator. The push-pull, CMOS, and TTL-compatible output drives logic inputs directly — no external pull-up resistor needed, which saves a component and a trace on the board. ## 5.2 µA quiescent — the power budget anchor The input bias current is 0.02 µA max at 5 V, so high-impedance sensor interfaces (thermistors, photodiodes) won't see significant offset from the input stage. Common-mode rejection is 82 dB typical, with 77 dB PSRR, adequate for noisy supply rails in mixed-signal designs. ## Package and footprint Housed in an SOT-23-8 package, the MAX9077EKA/GH9-T occupies minimal board area — roughly 3 mm × 3 mm — and suits high-density layouts. Surface-mount assembly is standard; no thermal pad or exposed paddle to plan for. The input offset voltage is 8 mV max at 5 V, so budget that into the threshold accuracy for low-margin sense points.","metaTitle":"MAX9077EKA/GH9-T Comparator, 250ns, SOT-23-8","metaDescription":"Maxim MAX9077EKA/GH9-T dual general-purpose comparator: 250ns typ propagation delay, 5.2µA quiescent, 2.1V-5.5V supply, SOT-23-8. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Type":"General Purpose","Package":"Bulk","Output Type":"Push-Pull, CMOS, TTL, Output","Mounting Type":"Surface Mount","Package / Case":"SOT-23-8","lifecycle_stage":"eol_hot","CMRR, PSRR (Typ)":"82dB, 77dB PSRR","Number of Elements":"2","Operating Temperature":"-40°C ~ 85°C","Propagation Delay (Max)":"250ns (Typ)","Supplier Device Package":"SOT-23-8","Current - Quiescent (Max)":"5.2µA","Current - Input Bias (Max)":"0.02µA @ 5V","Voltage - Input Offset (Max)":"8mV @ 5V","Voltage - Supply, Single/Dual (±)":"2.1V ~ 5.5V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.36","stockQuantity":0,"priceTiers":[{"qty":221,"price":"$1.36000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/079caf71a2a2f21000d01a1e79d82aec.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is MAX9077EKA/GH9-T a direct replacement for MAX9075?","answer":"The MAX9077 is a dual comparator; the MAX9075 is a single comparator in the same family. They are not pin-compatible, so a board respin is required to swap between them."},{"question":"Is MAX9077EKA/GH9-T RoHS compliant?","answer":"No — the MAX9077EKA/GH9-T is listed as RoHS non-compliant."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX9077EKA-GH9-T","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX9077EKA-GH9-T when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}