{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX9060EUK+T","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX9060EUKT","canonicalUrl":"https://icboms.com/analog-devices/MAX9060EUKT","factsUrl":"https://icboms.com/api/mcp/products/MAX9060EUK%2BT","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX9060EUK+T general-purpose comparator, 1-element, open-drain output, 1.1µA quiescent current, 25µs propagation delay, SC-74A/SOT-753 package, SOT-23-5 supplier package, -40°C to 85°C.","salesMarkdown":"## 1.1 µA quiescent current — the battery-life decision The MAX9060EUK+T: For a threshold monitor that stays awake continuously — battery fuel gauge, power-good supervisor, wake-up detector — this current sits below the self-discharge rate of a CR2032 coin cell, so the comparator does not dominate the sleep budget. Propagation delay is 25 µs max. That is fast enough to catch a supply brownout or a sensor edge in a 10 kHz control loop, but not for a switching power supply cycle-by-cycle current limit — the 25 µs window includes the comparator's internal settling plus the output slew into the load capacitance. ## Open-drain output and supply flexibility The open-drain output lets the comparator drive a pull-up to a different voltage than the supply rail — a 1.8 V microcontroller input can be driven from a comparator running on a 3.3 V supply, or multiple open-drain outputs can be wire-ORed on a single interrupt line. The output sinks current when the non-inverting input crosses the threshold; the pull-up resistor sets the logic-high level. Input offset voltage is 6 mV max at 1.8 V. For a 100 mV threshold, that is 6 % uncertainty — acceptable for a power-good flag or a window comparator with hysteresis, but not for a precision zero-crossing detector. The ±12 mV built-in hysteresis cleans up noise on slowly moving signals so the output does not chatter near the trip point. Input bias current is 0.01 µA max at 1.8 V. A 10 MΩ source resistor drops only 0.1 mV from bias current — negligible for most threshold dividers. The single-element comparator fits into a 5-pin SOT-23 footprint (SC-74A case code), which is the same land pattern as many general-purpose op-amps and references, so the PCB layout reuses an existing cell. The comparator's electrical specs are guaranteed across this range, not just at 25°C. Analog Devices lists the MAX9060EUK+T as Active product status.","metaTitle":"MAX9060EUK+T Analog Devices Comparator, 1.1µA, SOT-23-5","metaDescription":"MAX9060EUK+T general-purpose comparator from Analog Devices. 1.1µA quiescent current, 25µs propagation delay, open-drain output. Active, RoHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Type":"General Purpose","Package":"Tape & Reel (TR); Cut Tape (CT)","Hysteresis":"±12mV","Output Type":"Open-Drain","Mounting Type":"Surface Mount","Package / Case":"SC-74A, SOT-753","lifecycle_stage":"eol_hot","Number of Elements":"1","Operating Temperature":"-40°C ~ 85°C","Propagation Delay (Max)":"25µs","Supplier Device Package":"SOT-23-5","Current - Quiescent (Max)":"1.1µA","Current - Input Bias (Max)":"0.01µA @ 1.8V","Voltage - Input Offset (Max)":"6mV @ 1.8V","Voltage - Supply, Single/Dual (±)":"1V ~ 5.5V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.37","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.37000","currency":"USD"},{"qty":10,"price":"$1.22200","currency":"USD"},{"qty":25,"price":"$1.15960","currency":"USD"},{"qty":100,"price":"$0.95240","currency":"USD"},{"qty":250,"price":"$0.89032","currency":"USD"},{"qty":500,"price":"$0.78680","currency":"USD"},{"qty":1000,"price":"$0.62115","currency":"USD"},{"qty":2500,"price":"$0.57974","currency":"USD"},{"qty":5000,"price":"$0.55075","currency":"USD"},{"qty":12500,"price":"$0.53005","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/40912d0128473b0a9a10c55a43df0d52.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What package does MAX9060EUK+T come in?","answer":"The device is housed in a 5-pin SOT-23 package (SC-74A case code, supplier device package SOT-23-5). The tape-and-reel option (TR suffix) is the standard reel quantity for this package size."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX9060EUKT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX9060EUKT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:45:10.375Z","lastPublished":"2026-07-22T19:45:10.375Z","indexable":true}}