{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MAX8530ETTP2","brand":"Analog Devices","brandSlug":"analog-devices","productSlug":"MAX8530ETTP2","canonicalUrl":"https://icboms.com/analog-devices/MAX8530ETTP2","factsUrl":"https://icboms.com/api/mcp/products/MAX8530ETTP2","rawCanonicalId":null},"summary":{"shortDescription":"Analog Devices MAX8530ETTP2 dual-output LDO regulator, fixed 2.5V/1.8V outputs, 200mA/150mA, 60dB PSRR at 100Hz, 6-WDFN exposed pad, active.","salesMarkdown":"## What the 60 dB PSRR at 100 Hz means for a noise-sensitive rail The MAX8530ETTP2 is a dual-output LDO that delivers a fixed 2.5 V rail at 200 mA and a fixed 1.8 V rail at 150 mA. The 60 dB PSRR at 100 Hz means it attenuates 100 Hz ripple — the fundamental of a full-wave rectified mains supply — by a factor of 1000. If the input has 100 mV of 100 Hz ripple, the output sees about 100 µV. That is clean enough to feed an analog front-end or a PLL supply without an additional LC filter. ## Dropout headroom and quiescent draw — the real BOM numbers Maximum dropout is 200 mV at 100 mA per channel. If the input rail is 2.7 V, the 2.5 V output stays in regulation down to 100 mA load. Below that, headroom improves. The 220 µA quiescent current is the sum of both channels — not per regulator — so in a battery-backed always-on rail the LDO's own draw is under a quarter milliamp. That matters when the system spends most of its life in a low-power state and wakes to supply an ADC or a wireless transceiver. ## Protection set and temperature grade — field-service perspective Over-current, over-temperature, and short-circuit protection are on-die. No external supervisor or reset IC is needed for the output rails — the Enable and Reset control pins let a host processor sequence the outputs or hold them off during power-up.","metaTitle":"MAX8530ETTP2 Dual LDO, 2.5V/1.8V Fixed, 200mA/150mA","metaDescription":"MAX8530ETTP2 dual-output LDO from Analog Devices, fixed 2.5V/1.8V rails, 200mA/150mA, 60dB PSRR at 100Hz, active production, 6-WDFN. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"PSRR":"60dB (100Hz)","Package":"Bulk","Output Type":"Fixed","Mounting Type":"Surface Mount","Package / Case":"6-WDFN Exposed Pad","lifecycle_stage":"eol_hot","Control Features":"Enable, Reset","Current - Output":"200mA, 150mA","Protection Features":"Over Current, Over Temperature, Short Circuit","Number of Regulators":"2","Output Configuration":"Positive","Operating Temperature":"-40°C ~ 85°C (TA)","Voltage - Input (Max)":"6.5V","Voltage Dropout (Max)":"0.2V @ 100mA","Supplier Device Package":"6-TDFN (3x3)","Current - Quiescent (Iq)":"220 µA","Voltage - Output (Min/Fixed)":"2.5V, 1.8V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.7","stockQuantity":0,"priceTiers":[{"qty":177,"price":"$1.70000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/604ae23975065463e7e6d33b2f1806a5.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the PSRR of MAX8530ETTP2?","answer":"The PSRR is 60 dB at 100 Hz. This is the ripple rejection at the fundamental of a full-wave rectified mains supply — the LDO attenuates 100 Hz input ripple by 60 dB, so a 100 mVp-p ripple on the input becomes roughly 100 µVp-p on the output."},{"question":"What package does MAX8530ETTP2 come in?","answer":"The part is supplied in a 6-WDFN exposed pad package (3x3 mm body), also referred to as 6-TDFN."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/analog-devices/MAX8530ETTP2","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/analog-devices/MAX8530ETTP2 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}